799230
31
Zoom out
Zoom in
Previous page
1/164
Next page
31
EN
Igniting the burners with
a piezo igniter
In general, the burners are ignited with either a piezo
integrated into a control knob or a battery-powered pi-
ezo. Each burner has its own control knob. You can start
the ignition from the control knob with the lightning
symbol . You can ignite the burner by following the
instructions below:
1. Open the hood of the grill.
2. Open the gas ow using the low-pressure regu-
lator.
3. Press the control knob of the burner down (A)
and set it to (B). The piezo integrated into the
control knob ignites the burner.
4. If the grill is using a battery-powered piezo (C),
check that the battery is in place and installed
the correct way. Press and hold the piezo button
(D) until the grill burner lights up.
5. Set the burner ame at a suitable power, be-
tween and .
6. When the rst burner has been ignited, you can
ignite the remaining burners in order by turning
the control knob counter-clockwise to .
7. Set the burner ame at a suitable power, be-
tween and .
+
-AA
Igniting the burners with a match or
long lighter
1. Open the hood of the grill.
2. Open the gas ow using the low-pressure regu-
lator.
3. Light a long match or lighter.
4. Press the control knob of the burner and turn it
to .
5. Place a long match or lighter about a centimeter
away from the burner.
6. When the rst burner has been ignited, you can
ignite the remaining burners in order by turning
the control knob counter-clockwise between
and .
If the burner does not light up within ve
seconds, turn the control knob to OFF and try
to nd a solution from the troubleshooting
table.
If the burner does not light up, turn the con-
trol knob to OFF and wait 5 minutes before
attempting to ignite the burner again. If you
cannot get the burner to ignite using the
piezo igniter, you can try lighting the burner
up with a long match or lighter. Igniting the burner of the side cooker
1. Open the lid of the side cooker.
2. Press the control knob of the burner and turn
it to . The piezo integrated into the control
knob ignites the burner.
3. If the grill has a battery-powered piezo, press
and hold the piezo button until the burner lights
up.
4. Set the burner ame at a suitable power,
between and .
If the burner does not light up, turn the cont-
rol knob to OFF and wait 5 minutes before
attempting to ignite the burner again. If you
cannot get the burner to ignite using the
piezo igniter, you can try lighting the burner
up with a long match or lighter.
AB
C
D
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mustang 613318 - Connoisseur 4-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mustang 613318 - Connoisseur 4-1 in the language / languages: English, Swedish, Finnish as an attachment in your email.

The manual is 18.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info