30232
10
Zoom out
Zoom in
Previous page
1/23
Next page
27
6. The STEERING LL
The PROFI CAR offers the following facilities for setting up the steering function:
Servo norm, centre and travel right/left (èè 6.1)
These settings are used to adjust the servo to match your car’s mechanical
system, and at the same time determine the maximum steering travel and the
centre setting for straight running.
Steering MINTRA (MINimum TRAvel) (èè 6.2)
You can adjust the steering travel using the digi-adjustor while you are running
the car. This enables you to fine-tune the steering response to suit changing
course conditions or vehicle characteristics (e.g. tyre temperature). This menu
point allows you to define the smallest steering travel which you can set by
rotating the digi-adjustor. MINTRA avoids the danger of suddenly having no
steering control if you turn the adjustor too far by mistake. The smallest value
you can set is 30%.
EXPO (èè 6.3
By applying EXPOnential to the steering function, you can make the steering
response of your car more or less sensitive around the centre position.
Steering travel and trim increment (èè 6.4)
(„T“ menu, menu point „TRIM“)
The effect of trim rocker A (steering centre point) and the digi-adjustor (steering
travel) can be set to FINE (1% increments), MEDIUM (2% increments) or COARSE
(4% increments). The selected setting also applies to all other trim rockers.
6.1. Adjusting the steering servo
The first step is to set the signal norm and the direction of rotation for the servo,
followed by the settings for left (LL), straight ahead () and right (ŒŒ). These basic
settings ensure that servo 1 (steering servo) is set up correctly to suit the
characteristics of your model.
The drawing on the right shows an example of
the settings available in the “S-TRA” menu. The
stated angles (0°/45°) show what the servo “can
do”. The adjustments points LL“ and „ŒŒ define
the maximum travel set for the steering servo.
To adjust either of these points you must turn
the steering wheel in the corresponding
direction. At the point you determine the servo setting for “straight ahead”.
The S-NORM” menu point is used to select the signal format (MULTIPLEX or
UNIVERSAL) and direction of rotation for the servo. “MULTIPLEX norm” means that
the pulse width for the centre position is 1.6 ms, and the full range is +/- 0.55 ms.
UNIVERSAL servos operate on 1.5 ms +/- 0.5 ms. If the selected signal format does not
match your servo, the centre position and travels will not be correct.
The “S-TRAV” menu point is used to set the centre position and steering travels for
right and left.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex PROFIcar301 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex PROFIcar301 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex PROFIcar301

Multiplex PROFIcar301 User Manual - German - 23 pages

Multiplex PROFIcar301 User Manual - French - 23 pages

Multiplex PROFIcar301 User Manual - Spanish - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info