30232
9
Zoom out
Zoom in
Previous page
1/23
Next page
26
5. Switching on for the first time
5.1. Charging the transmitter battery (maximum charge current 1 A)
First connect the charge lead (Order No. 12 5023) to the charger, then connect the
charge lead to the transmitter.
Charging - important:
Automatic battery fuse
The battery in your PROFI CAR features an integral thermal fuse which protects the
pack if it is shorted, or if the charge current is excessive.
Use only genuine fuse-protected MULTIPLEX batteries!
!!
If a short-circuit occurs and you eliminate it (or cut off the charge current), the
fuse cools down again in about one minute, and the battery is then ready for use
again.
Notes on charging techniques:
Standard (slow) charging
is possible, and no special techniques are required.
If you wish to rapid-charge the battery using automatic termination, the charge
current must not exceed 600 mA, otherwise the fuse element may be triggered and
the charge process will be interrupted prematurely.
5.2. Charging the receiver battery
Read the charging notes printed on the battery. Do not exceed the charge currents
stated by the battery manufacturer!
5.3. Fitting the transmitter crystal
Transmitter crystals feature a blue sleeve, and the printed channel number is
preceded by “Tx” or “S”. The transmitter and receiver crystals must bear the same
channel number. The transmitter crystal is plugged into the RF module (-> illustration
on page i).
Please be very careful when handling crystals:
v Don’t drop them
v Don’t force them into the crystal socket
v Protect them from vibration in storage and in use
5.4. Adjusting the trigger
If you loosen the screw in the trigger, the bar can be adjusted to suit your “finger
diameter”.
CAUTION when tightening the screw: if you over-tighten it, the pressed-fit nut on
the other side may come loose!
5.5. Testing the transmitter
Now you can switch on the transmitter, connect the components of a receiving
system, and find out “what happens” when you operate the transmitter. All you need
are a receiver with servos connected to channels 1 and 2 and a receiver battery. If you
prefer to use a complete car for this, connect the steering servo to channel 1 and the
throttle/brake servo to channel 2.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Multiplex PROFIcar301 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Multiplex PROFIcar301 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Multiplex PROFIcar301

Multiplex PROFIcar301 User Manual - German - 23 pages

Multiplex PROFIcar301 User Manual - French - 23 pages

Multiplex PROFIcar301 User Manual - Spanish - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info