Manual MTD CubCadet serie 6000 (page 12 of 25) (English)

507839

Zoom out

Zoom in

1/25

User manual English

Note

When the ignition is switched on, the

battery voltage indicator is indicated

for a short period and then the

operating hours are indicated.

The operating hours are always

counted except for when the ignition

key is in the /0 position or when it

is removed.

Note

Each time 50 operating hours have

elapsed (according to the model),

the oil change indicator ‘CNG / OIL’

appears in the display for five

minutes. This message appears

after the next two hours of

operation. See the engine manual

for oil change intervals.

Engine temperature warning

light (H)

If the indicator light lights up when

the engine is running, switch the

engine off immediately and let it cool

down. Where necessary, visit a

garage.

Revolution counter (J)

shows engine rotation in revolutions

per minute (rev/min). Optimum

revolution – 3400–3600 rev/min.

Note

When operating acessories

connected to the PTO, the indicator

needle should always be in the

green area (K) of the revolution

counter.

Tank stopper (15)

Fig. 2

PTO-switch for reverse

driving (16)

Fig. 2

enables the driver to drive

backwards with the PTO gear

activated. A pilot light is illuminated

in the switch as long as the function

is activated.

Engage / Pilot light

Note

Once activated, the function

remains active until the ignition key is

turned for at least 20 seconds in the

/0 position.

PTO-selector lever (17)

Fig. 8

Switching the power shaft on and

off.

a) Push the lever forwards in order

to activate the middle PTO

(2000 rev/min).

b) Lift the lever backwards in order

to activate the rear PTO

(540 rev/min).

c) Move the lever into the middle

position in order to activate both

PTOs at or backwards until it

engages.

For actuating, first push the lever

slightly to the right and then

forwards or backwards, until it

engages.

Central hydraulics lever (18)

Fig. 9

Serves to lift and lower attachments

to the 3-point attachment device as

well as to the mower movement

between the axles.

a) lowering

b) lifting

Lowest setting = ‘floating setting’

Gear lever (19)

t~êåáåÖK=a~ã~ÖÉ=íç=íÜÉ=

~ééäá~åÅÉK

`Ü~åÖáåÖ=íÜÉ=ëéÉÉÇ=ëÜçìäÇ=çåäó=

í~âÉ=éä~ÅÉ=ïÜÉå=íÜÉ=íÜÉ=~ééäá~åÅÉ=áë=

~í=~=ëí~åÇ>

Fig. 11

The lever serves to select high

speed (H) or low speed (L).

High speed - forwards (H)

Forwards approx. 0–17.7 km/h

Reverse approx. 0–8.9 km/h

Slow speed - forwards (L):

Forwards approx. 0–10.2 km/h

Reverse approx. 0–5.1 km/h

Neutral (N):

Decoupled gear For moving the

appliance when the engine is

switched off.

For actuating, first push the lever

slightly to the right and then

forwards or backwards, until it

engages.

Can holder (20)

Fig. 2

Handle bars (21):

Fig. 2

For making it easier to get on/off the

appliance.

Indicator/Brake lights (22)

Fig. 2

Holder symbol (23)

Fig. 2

Storage area (24)

Fig. 2

12 V connection socket (25)

Fig. 2

It serves for connecting the trailer

illumination.

Seat belt (26)

Fig. 2

Auxiliary hydraulics lever (27) -

optional

Fig. 12

For controlling the movement of the

accessories connected via the

auxilliary hydraulics of the appliance.

1. Lift the lever backwards in order

to raise the front or the lifting

accessory / attachment.

2. Lift the lever forward in order to

lower the lifting accessory /

attachment.

3. In order to bring the front lifting/

mounting appliance into the

‘floating setting’ push the lever

fully forwards until it engages.

4. Push the lever to the right, in

order to angle the attachment to

the right or to empty the shovel.

5. Push the lever to the left, in order

to angle the attachment to the left

or to prop up the shovel.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of MTD CubCadet serie 6000 in the language / languages: English as an attachment in your email.

The manual is 2,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MTD CubCadet serie 6000

MTD CubCadet serie 6000 User Manual - German - 26 pages

MTD CubCadet serie 6000 User Manual - Dutch - 26 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

MTD CubCadet serie 6000 Manual

Product: