672423
7
Zoom out
Zoom in
Previous page
1/15
Next page
English Operating manual
4
Contents
Safe operating practices . . . . . . . 4
Operating and display elements . 7
Installation manual . . . . . . . . . . . 7
Oil and petrol . . . . . . . . . . . . . . . 8
Operating. . . . . . . . . . . . . . . . . . . 8
Maintenance and cleaning . . . . 10
Transportation . . . . . . . . . . . . . . 11
Warranty . . . . . . . . . . . . . . . . . . 11
Troubleshooting . . . . . . . . . . . . 12
Details on the ratings plate
Enter all information on the rating
plate of your unit in the following
field. You can find the rating plate
near the engine.
These specifications are very
important for subsequent
identification when ordering spare
parts and for customer service.
These and other details for your
appliance can be found on the
separate CE declaration of conformity
that forms an integral part of these
operating instructions.
Illustrations
Fold out the illustrated pages at
the start of the operating manual.
Graphical representations may
deviate in detail from the purchased
unit.
Safe operating practices
Using the unit correctly
This unit is designed
for private use,
for trimming lawn edges and
small inaccessible areas of grass
(e.g. under bushes),
for cutting wild growth, shrubs
and undergrowth,
according to the descriptions and
safety instructions indicated in this
operating manual.
Any other use is not as intended.
Improper use is not covered by the
warranty and the manufacturer will
reject any liability. The user is liable
for all injuries to third parties and
damage to their property.
Operate the unit only in the technical
condition as stipulated and delivered
by the manufacturer.
Arbitrary changes to the unit will
exclude the manufacturer from any
liability for resulting injury and/or
damage.
Read all instructions before
operating
Please read these instructions
carefully. Familiarize yourself
with the operation and handling
of the unit.
Do not use this unit if you are tired
or ill or under the influence of
alcohol, drugs or medication.
Children and young people under
16 years of age must not operate
the unit.
This unit is not designed to be
used by persons (including
children) who have limited physical,
sensory or mental abilities or who
have no experience and/or
knowledge of the unit, unless they
are supervised by a person
responsible for their safety or they
have been instructed by the
person how to use the unit.
Children should be supervised to
ensure that they do not play with
the appliance.
Check the unit before using it.
Replace damaged parts. Check
whether fuel is leaking out. Ensure
that all connections are attached
and tight. Replace cutting
attachment parts which are
cracked, flawed or damaged in
any other way. Ensure that the
cutting attachment has been
installed correctly and attached
securely. Ensure that the guard for
the cutting attachment has been
attached correctly and is in the
recommended position. If these
instructions are not followed, the
user and bystanders may be
injured or the unit damaged.
Use only original replacement lines
which have a diameter of 3,0 mm.
Never use a metal-reinforced
string, wire, chain, rope, etc.
These may break off and become
dangerous projectiles.
Always be aware of the risk of
injury to head, hands and feet.
Depress the throttle. It must
automatically return to the home
position. Perform all settings and/
or repairs before operating the unit.
Before using the unit, always clear
the area which you want to trim.
Remove all objects such as stones,
broken glass, nails, wire or string
which could be ejected or become
entangled in the cutting attachment.
Remove children, bystanders and
animals from the area. Keep children,
bystanders and animals at
a minimum distance of 15 m;
there
is always a risk of bystanders
being
hit by
ejected objects. Bystanders
should
wear eye protection.
If somebody approaches,
immediately switch off the engine
and cutting attachment.
Safety instructions for
petrol-driven units
Petrol is highly flammable and the
vapours may explode if ignited.
Take the following precautions:
Store petrol in designated and
permitted containers only.
Keep ignition sources away from
spilled petrol. Do not start the
engine until the petrol vapours
have evaporated.
Before filling the tank, always
switch off the engine and leave it
to cool down. Never remove the
tank cap or fill the tank while the
engine is hot. Before using the
unit, ensure that the tank cap is
screwed on tightly. Slowly unscrew
the tank cap to reduce the
pressure in the tank gradually.
Mix petrol and fill the tank in
a clean, well ventilated outdoor
area only where there are no
sparks or flames. After switching
off the engine, slowly unscrew the
tank cap. Do not smoke while
mixing petrol or filling the tank.
Immediately wipe any spilled
petrol off the unit.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MTD 1033 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MTD 1033 in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MTD 1033

MTD 1033 User Manual - German - 16 pages

MTD 1033 User Manual - Dutch - 16 pages

MTD 1033 User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info