672423
14
Zoom out
Zoom in
Previous page
1/15
Next page
Operating manual English
11
Check/replace spark plug
Use only original spark plugs or ones
approved by the manufacturer.
The correct electrode gap is
0,6–0,7 mm. Every 25 operating
hours take out the spark plug and
check its condition.
Stop the engine and leave it to
cool down.
Remove spark-plug terminal.
Remove dirt from around the
spark plug.
Unscrew spark plug to the left
with a spark plug wrench.
Check/adjust the electrode gap
of 0,6–0,7 mm (Fig. 28).
Note
Replace a damaged, sooted or dirty
spark plug.
Screw in spark plug and tighten to
a torque of 12.3–13.5 Nm. Do not
tighten too tightly.
Cleaning the exhaust
Fig. 29
Clean the area under the exhaust
cover (1) every 25 operating hours.
To do this, the exhaust cover must
be removed.
This work may be carried out by
a specialist workshop only.
Checking/topping up the
grease in the gearbox
Fig. 30
Check the level of grease in the
gearbox every 25 operating hours.
To do this, remove the screw (1).
If required, refill with a high-quality
lithium grease.
This work may be carried out by
a specialist workshop only.
Cleaning the unit
`~ìíáçå
^äï~óë=âÉÉé=íÜÉ=ìåáí=~åÇ=îÉåíáä~íáçå=
ëäçíë=ÅäÉ~å=~åÇ=ÑêÉÉ=çÑ=ÇáêíK
Use a small brush for cleaning the
outside of the unit.
Do not use abrasive detergents.
Household cleaners which contain
aromatic oils such as pine oil or
lemon as well as solvents such as
kerosene may damage the plastic
housing and handle.
Wipe housing with a damp cloth only.
Storage
Never store the unit with fuel in the
tank or in a location where petrol
vapours may be ignited by a spark
or naked flame.
Before storing the unit, leave the
engine to cool down.
Store the unit in a dry, closed room
to prevent unauthorised use or
damage. Keep the unit away
from children.
Long-term storage
If the unit is to be stored for a pro-
longed period, proceed as follows:
Drain all the fuel out of the tank
and pour into a container with the
same two-stroke mixture. Do not
use fuel which has been stored for
longer than 60 days.
Start the engine and leave running
until it stops. This ensures that
there is no fuel left in the
carburettor.
Leave the engine to cool down.
Take out the spark plug and pour
a high-quality engine oil or two-
stroke oil into the cylinder. Slowly
pull the starter rope to distribute
the oil. Reinstall the spark plug.
Note
Take out the spark plug and pour
all the oil out of the cylinder before
starting the unit after storage.
Thoroughly clean the unit and
check for loose and damaged
parts. Repair or replace damaged
parts and tighten loose screws,
nuts and bolts. The unit can now
be stored.
Store the unit in a dry, closed room
to prevent unauthorised use or
damage. Keep the unit away
from children.
Transportation
Before transporting the unit,
leave it to cool down.
Empty the fuel tank before
transporting the unit. Filler cap
must be closed tightly.
Secure the unit to prevent it from
shifting during transportation.
Warranty
The warranty regulations issued by
our company or the importer are
valid in all countries. We shall repair
any faults on your unit free of charge
in accordance with the warranty,
provided the fault was due to defec-
tive materials or manufacturing.
If claiming under the warranty,
please contact your seller or your
nearest branch.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MTD 1033 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MTD 1033 in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MTD 1033

MTD 1033 User Manual - German - 16 pages

MTD 1033 User Manual - Dutch - 16 pages

MTD 1033 User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info