Manual Mountfield 4155H (page 10 of 86) (English, German, Dutch, French)

765491

Zoom out

Zoom in

1/86

ENGLISH

3 ASSEMBLY

To avoid injury and damage to people

and property, do not use the machine

until all the measures in this instruction

have been carried out..

3.1 ACCESSORIES BAG

The machine is supplied with a plastic bag

containing components which shall be used during

the assembly. The bag contains (fig. 1):

Pos. No. Designation Dimension

A1 Key

B 1 Spare key

C 2 Tension pin 6 x 36

D 1 Shim washer 16 x 38 x 0.5

E 1 Shim washer 16 x 38 x 1.0

F 2 Shoulder washer

G2 Screw 8 x 20

H 2 Screw knob

I 4 Washer 8.4 x 24 x 1.5

J 1 Drawing plate

K4 Screw 8 x 20

L2Nut

M 2 Screw for battery

N 2 Nut for battery

3.2 ENGINE CASING (3:L)

To fill with fuel and to inspect and maintain the

engine and battery, open the engine casing.

The engine must not be running when

the casing is opened.

3.2.1 Opening

1. Raise the seat lock (2:S) and fold the seat

forwards.

2. Pull up the rubber strap at the front edge of the

casing (3:M).

3. Grasp the front edge of the engine casing and

fold up the casing (fig. 4).

3.2.2 Closing

1. Grasp the front edge of the engine casing and

fold down the casing (fig. 4).

2. Secure the front edge of the casing with the

rubber strap (3:M).

The machine may not be operated

unless the engine casing is closed and

locked. Risk of burns and crushing

injuries.

3.3 BATTERY

Do not short circuit the battery’s

terminals. Sparks occur which can

result in fire. Do not wear metal

jewellery which can come into contact

with the battery terminals.

In the event of damage to the battery

casing, cover, terminals or damage to

the strip covering the valves, the

battery should be replaced.

The battery is a valve-regulated battery with 12 V

nominal voltage. The battery fluid does not need to

and cannot be checked or topped up. The only

maintenance that is required is charging, for

example after extended storage.

After charging the battery must be stored in a cool

place.

The battery must be fully charged

before being used for the first time. The

battery must always be stored fully

charged. If the battery is stored while

discharged, serious damage will occur.

3.3.1 Charging with the engine

The battery can be charged using the engine’s

generator as follows:

1. Install the battery in the machine as shown

below.

2. Place the machine outdoors or install an

extraction device for the exhaust fumes.

3. Start the engine according to the instructions in

the user guide.

4. Allow the engine to run continuously for 45

minutes.

5. Stop the engine. The battery will now be fully

charged.

3.3.2 Charging using battery charger

When charging using a battery charger, a battery

charger with constant voltage must be used.

Contact your dealer to purchase a battery charger

with constant voltage.

The battery can be damaged if a standard type

battery charger is used.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mountfield 4155H in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mountfield 4155H Manual

Product: