Manual Moulinex Odyssey 3000 A DZ3 (page 11 of 62) (Dutch)

4908

Zoom out

Zoom in

1/62

- Plug in the iron.

- Once the temperature adjustment indicator

(I) goes out, unplug the iron and hold it over

the sink.

- Push the steam control (G) to the self-

cleaning position

. Hold it in this position

for 15 seconds: the mixture of water and

steam will take with it the scale residues

contained in the soleplate.

- Reset the steam control (G) to

- Using slow and deliberate movements,

swivel the iron from left to right so as to give

the soleplate a good rinse and to get rid of

the water remaining in the soleplate.

- Empty the tank (K).

- Plug the iron in again in order to dry the

soleplate; this operation should be

performed over a cloth (watch out for

ejections of water and steam).

- After this operation, again unplug the iron

and allow it to cool down before cleaning the

soleplate.

- Clean the soleplate (iron cold) on a thick,

clean, damp cotton cloth, before putting

away the iron or before reusing it.

. Storage

After each use:

- Unplug the iron.

- Empty the tank (K).

- Set the steam control (G) to position

- Allow your iron to cool down.

- Unwind the power cable around the non-slip

iron rest (M) by making a loop of about 10 cm

starting from the iron and fix the clip onto

the iron rest.

- Store it on its heel.

. If you have the “Use & Store” iron tidy

accessory (P) (depending on model), you

can put away the iron hot as soon as you

have finished using it. Handle the hot iron

with care.

- Engage the point of the iron in the iron

tidy and lock the heel in place by pressing

on the handle; a slight noise will confirm that

it is locked into place.

- Put away the whole assembly on its heel or

hang it on the wall, using a hook. The fixing

system (screws and plugs) should be

adapted depending on what type of wall you

have (concrete, plaster, etc.) and must sup-

port a weight of 10 kg.

. Unlocking the iron:

- Take the assembly (iron and locked iron tidy).

- Unwind the power cable.

- Pull backwards on the lever (P1), at the same

time lifting the iron.

Accessories

You can obtain the following accessories from

your retailer or from an approved Moulinex

service centre:

- Kit of 2 “Master Spray” dossiers: DZ9

- Box of 2 “Pro Cal System” refills: DZ8

- “Use & Store” Iron tidy: A17A01

What to do if your appliance

does not work

Problems Causes Remedies

The iron does Poor connection Check the plug

not heat up

Temperature Adjust the

adjustment temperature

control (H) on control (H)

min.

No steam and Steam control Adjust the steam

the iron is hot (G) set to

control to the

desired rate of flow

The tank is empty Fill it with water

Soleplate tem- Set the temperature

perature control adjustment control

on too low a setting (H) to the steam

zone, at the same

time adjusting the

temperature to the

type of fabric to be

ironed

The spray and the The tank is empty Fill tank with water

pressing button are

not working

Significant reduction Scale is starting Perform an “auto

in the flow of steam to form in the iron clean”

Tank almost empty Fill it with water

The iron is causing The water used Perform an

brown marks on the contained or “auto-clean ”

laundry contains organic operation and

residues change the

water. To find out

more, consult the

section on “What

type of water is best

suited to your iron”

Odyssey.Eu11 1/12/00, 13:4417

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Moulinex Odyssey 3000 A DZ3 in the language / languages: Dutch as an attachment in your email.

The manual is 0,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Moulinex Odyssey 3000 A DZ3 Manual

Product: