Manual Moulinex Odyssey 3000 A DZ3 (page 9 of 62) (Dutch)

4908

Zoom out

Zoom in

1/62

- Replace the cassette (L) on the tank (K) by

pressing down fully, the marker is locked.

This refill (L2) must be changed regularly in

order to be effective in counteracting the for-

mation of limescale inside your iron.

To replace the refill (L2):

- Unplug the iron and empty the tank.

- Remove the cassette (L) and take out the

used refill (L2) from the lid (L1) of the cas-

sette.

- Lock the new refill (L2) onto the lid (L1), po-

sition the marker and replace the cassette

(L).

We recommend the following intervals for

changing the refill (L2):

Hardness of Ironing time

water used 2 hrs / week 4 hrs / week 6 hrs / week

Normal 9 months 6 months 3 months

Hard 6 months 4 months 2 months

Very hard 3 months 2 months 1 month

Classification table for water hardness

France Germany Great Britain International

Normal <15°f <8.5°d < 10.5°e < 1.5 mmol/l

or < 3 mEq/l

1.5 mmol/l and

Hard >15°f and > 8.5°d and >10.5°e and < 3 mmol/l

< 30°f< 17°d< 21°eor

> 3 mEq/l and

< 6 mEq/l

Very hard > 30°f> 17°d> 21°e > 3 mmol/l

or > 6mEq/l

To find out the exact hardness of your tap

water, you should contact your local authority

or water company.

“MASTER SPRAY” ASSEMBLY (C) (DEPENDING

MODEL):

The “Master Spray” assembly sprays a mix-

ture onto the laundry to facilitate ironing, by

making the iron glide more smoothly and by

removing creases.

The product in the doser (C4) is a concentrate

sold exclusively by Moulinex and specific to

the “Master Spray”. No other commercially

available product is suitable for this assembly.

The “Master Spray“ assembly is accessible at

all times so that it can be used instantly as

required.

This assembly only works if the tank in the iron

(K) contains water. In fact, each time it is

sprayed, the “Master Spray” diffuses a mixture

of water from the tank (K) and of the product

from the doser.

- Slightly raise the button (C1).

- Cut off the tip of the doser and insert it into

the open hole on the top of the button (C1).

- Squeeze the doser to empty its contents into

the tank of the “Master Spray” (C2).

- Press button (C1) again to close the opening

and dispose of the doser in accordance with

the recycling regulations in force in your

area.

To prime the “Master Spray”, it is necessary to

press a few times on the button (C1) to build up

a good spray. It is recommended to test the

« MasterSpray » solution onto a cloth before

starting using it for the ironing.

The contents of one doser corresponds to the

volume of the “Master Spray” tank (C2).

Important:

- If you accidently spray the undiluted

« MasterSpray » solution onto your linen,

wash it normally in order to remove the

marks.

- The “Master Spray” assembly is a

supplement to the cold water spray (D). We

would recommend that you only use the

“Master Spray ” for fabrics which are hard

to iron.

- Never spray directly onto the skin and eyes.

In case of contact, rinse with fresh water.

Do not leave within reach of children.

- Avoid spraying onto the floor: it could

become slippery.

- Store the dosers at a temperature of

between 4° and 40°C.

Using your iron for the first

time

. Filling the tank:

- Unplug your iron.

- Make sure that the “Pro Calc System” cas-

sette (L) is in the correct position and that

the steam control (G) is set to position

- Open the hatch or remove the “Master

Spray” easy-iron assembly (C) (depending

on model).

- Fill the tank (K) using the jug provided (O),

without exceeding the maximum level; the

contents of the jug (O) corresponds to the

Odyssey.Eu11 1/12/00, 13:4415

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Moulinex Odyssey 3000 A DZ3 in the language / languages: Dutch as an attachment in your email.

The manual is 0,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Moulinex Odyssey 3000 A DZ3 Manual

Product: