Manual Moulinex Odyssey 3000 A DZ3 (page 12 of 62) (Dutch)

4908

Zoom out

Zoom in

1/62

The “Thermo Temperature of the Wait for the

Sensor” indicator soleplate too high temperature

comes on with respect to the to fall, and the

setting selected on indicator will go out.

the temperature To cool the soleplate

adjustment control down faster, iron

directly on the

ironing board

with the iron in

steam position

The “Master Spray” The pump has not Press button (C1)

assembly does been primed several times

not work to obtain a good

spray

The tank (K) is Refill it with water

empty

If you have followed all the instructions

and your iron still does not work: Contact

an approved Moulinex service centre (see list

in the “ Moulinex Service ” booklet).

Ironing guide

USING THE RIGHT TEMPERATURE

Please refer to the labels on your laundry for

the composition of the fabrics or the instruc-

tions for ironing.

Ironing Types of fabric Thermostat

instructions

Synthetic fibres

acrylic, polyamide,

polyester .

Artificial fibres :

viscose

Natural fibres animal:

wool, silk

Natural fibres vegetable:

cotton

...

thick cotton, linen MAXI

Warning: Do not iron this article.

. If the composition of the fabric consists of

several types of textile, set the thermostat

control to the lowest advised temperature. If

you cannot determine the composition of the

fabrics on the label, do a test on a place

which is hard to see, starting at the lowest

temperature.

. Sort your laundry before ironing, keeping the

same types of fabric together. The iron heats

up more quickly than it cools down: so start

by ironing the laundry requiring the lowest

temperature and progress to the items

requiring higher temperatures (see table

above).

. Woollen materials can be steam ironed. To

prevent the soleplate of your iron coming into

direct contact with the wool, place a dry cloth

on top of the fabric to be ironed. You can

also iron these items on the reverse side.

. To prevent shining delicate fabrics (silk,

velvet, viscose, etc.) or for fabrics with im-

pressions (transfer, flock printing, etc.), iron

on the reverse.

. Certain stains may be fixed by a high

temperature, so it is best only to iron your

laundry once any stains have been

completely removed.

WHAT KIND OF WATER IS BEST SUITED TO YOUR

STEAM

IRON?

. Tap water if it does not contain any organic

products which could leave brown marks on

the laundry.

. Demineralised water - commercially

available (unscented).

. Distilled water - commercially available

(unscented).

We categorically advise you not to use any

other kind of water.

PRACTICAL ADVICE

. Caring for the soleplate

- Clean it at regular intervals. The longer you

wait to clean the soleplate, the harder it will

become to remove any marks.

- Do not scratch the soleplate and do not use

products which are aggressive or abrasive

to clean it.

. Traces of water, starch or limescale

When the iron is cold, rub with a thick cotton

cloth soaked in wine vinegar. Rinse

immediately with water and wipe dry.

. Stuck-on fabrics

- Allow your iron to cool down (at least 30 mi-

nutes) after unplugging it, then plug it back

in and set the thermostat to the position

MAXI. Once the iron is hot, place a clean

thick cotton cloth on the ironing board and

rub the soleplate of your iron energetically.

For greater effectiveness, you may also po-

sition your cloth on the edge of the ironing

board. Don’t forget to clean the edges of the

soleplate.

Odyssey.Eu11 1/12/00, 13:4418

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Moulinex Odyssey 3000 A DZ3 in the language / languages: Dutch as an attachment in your email.

The manual is 0,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Moulinex Odyssey 3000 A DZ3 Manual

Product: