493655
55
Zoom out
Zoom in
Previous page
1/75
Next page
EN-55
The image within the outer edges of the red
frame is captured.
The captured image is displayed in the REAL
mode automatically.
CAPTURE : ENTER + ENTER
CANCEL : MENU
CAPTURE : ENTER X2
CANCEL : MENU
12.Adjust the size of the image to be captured so that
such image stays within the red frame.
Press the S, T, W or X button to move the red
frame.
You can’t move the red frame outside the
scr
een.
Press the MENU button to cancel the
procedure.
CAPTURE : ENTER X2
CANCEL : MENU
13. Press the ENTER button twice.
Image capture will start.
CAPTURE : ENTER X2
CANCEL : MENU
CAPTURING IMAGE !
When the image capture completes, the
captured image will be displayed for 1 second.
Important:
You can’t change the new startup screen back to
the original startup scr
een. (Even when you select
RESET ALL in the FEATURE menu, the factory
default screen isn’t available any longer.) When you
want to change the startup screen again, capture
another image.
The captured image will be displayed from the
next startup. If the captur
ed image isn’t displayed,
make sure that the setting of SPLASH SCREEN in
the INSTALLATION 2 menu isn’t OFF. (See page
35.)
When BACK COLOR in the INSTALLATION 2
menu is set to IMAGE, the captur
ed image will be
displayed while no signal is supplied.
When no video signal is supplied, the projector
takes some time to display the captured image.
Some images can’t be captured correctly because
of their signal type.
Advanced features
Changing the image displayed at the
startup
You can display your desired image as the startup
screen (or splash screen). By setting the menu, you
can use such image instead of the background image
that is displayed when no video signal is supplied.
Important:
You can’t set IMAGE CAPTURE when PASSWORD
FUNCTION in the FEATURE menu has been set to
SPLASH ID SCREEN to enable the password lock.
You can’t set IMAGE CAPTURE when the
component video signal is inputted.
Setting procedure
(See page 32 for menu setting.)
1. Press the COMPUTER button to select the image
supplied to the COMPUTER/COMPONENT VIDEO
IN terminal.
2. Display your desired image.
3. Display the INSTALLATION 2 menu.
4. Select IMAGE CAPTURE by pressing the S or T
button.
5. Press the ENTER button.
The setting menu will be displayed.
INSTALLATION 2
CUSTOM IMAGE CAPTURE
SIZE
BACK COLOR
CAPTURE
GRAY
x1
1
1
2
2
opt.
GO
Set the background color
(Set the background color only when you set the
image size to x1 or x2.)
6. Select BACK COLOR by pressing the S or T
button.
7. Select your desired color for the background
(GRAY, RED, GREEN, BLUE, BLACK, WHITE,
RED50%, GREEN50%, or BLUE50%) by pressing
the W or X button.
Set the image size
8.
Select SIZE by pressing the S or T button.
9. Select x1, x2, or FULL by pressing the W or X
button.
x1 x2 FULL
Capture the image
10. Select CAPTURE by pressing the S or T button.
11.Press the ENTER button.
A red frame appears. (The size of the red frame
is 320 x 240 pixels.)
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi XD8100U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi XD8100U in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info