493655
56
Zoom out
Zoom in
Previous page
1/75
Next page
EN-56
Password function
This projector is equipped with the password function
that is designed for prevention of wrong operation by
children and restriction on operation by other than
specifi ed users. The password function has 3 modes
as follows.
DISPLAY INPUT .......... When the projector is turned
on, the startup screen (or splash screen) will appear
and stay on the screen until the password is
entered. When the password is entered, the startup
screen will switch to the regular operation screen.
MENU ACCESS ........... All the buttons except for the
POWER button on the projector are disabled. (The
buttons on the remote control are enabled.) You
can use this mode as a measure of prevention
of wrong operation by children and restriction on
operation by other than specifi ed users.
SPLASH ID SCREEN ... IMAGE CAPTURE and
SPLASH SCREEN in the INSTALLATION 2 menu
become unavailable. SPLASH SCREEN will be set
to ON automatically.
To enable the password function:
1. Display the FEATURE menu.
2. Press the S or T button to select PASSWORD
FUNCTION.
3. Press the W or X button to change the mode
among DISPLAY INPUT
, MENU ACCESS and
SPLASH ID SCREEN .
When the password has already been set, the
mode won’t be changed. In such cases, press
the ENTER button to cancel the password
function and try again.
4. Press the ENTER button.
The screen for setting the password function will
appear.
FEATURE
DISPLAY INPUT
1 2
opt.
LOCK
UNLOCK
12
ENTER
ENTER
5. Press the ENTER button.
The screen for entering a password will appear.
PASSWORD
CONFIRM
1
3
24
O K : ENTER CANCEL : MENU
6. Enter a 4 - 8 digit password using the S, X, T and
W
buttons.
(
S=1, X=2, T=3, W=4)
You can enter the value by pressing the number
buttons (1 to 4) while holding down the NUM
button on the remote control.
Advanced features (continued)
7. Press the ENTER button.
To cancel the procedure, press the MENU
button.
8. Enter the password again for confi rmation using the
same steps.
9. Press the ENTER button.
If the entered passwords don’t match, an error
message will appear.
To cancel the procedure, press the MENU
button.
To cancel the password function:
1. Display the FEATURE menu.
2. Press the S or T button to select PASSWORD
FUNCTION.
3. Press the ENTER button.
The screen for canceling the password function
will appear.
FEATURE
DISPLAY INPUT
1 2
opt.
LOCK
UNLOCK
12
ENTER
ENTER
4. Press the ENTER button.
The screen for entering the password will
appear.
PASSWORD
1
3
2 4
O K : ENTER CANCEL : MENU
5. Enter a 4 - 8 digit password using the S, X, T and
W
buttons.
(
S=1, X=2, T=3, W=4)
You can enter the value by pressing the number
buttons (1 to 4) while holding down the NUM
button on the remote control.
6. Press the ENTER button.
If you enter a wrong password, an error
message will appear.
To cancel the procedure, press the MENU
button.
Important:
Disable the password by pressing the MENU and
ENTER buttons on the projector at the same time.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi XD8100U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi XD8100U in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info