493655
53
Zoom out
Zoom in
Previous page
1/75
Next page
EN-53
Lamp relay
Using the lamp relay function, you can project images
continuously. The lamp relay function automatically
rests or switches the lamps. The lamp relay is
performed when LAMP SELECT in the INSTALLATION
1 menu is set to DUAL or SINGLE.
Setting the lamp relay interval
When LAMP SELECT is set to DUAL:
Either of the lamps is automatically put to rest.
(See page 32 for menu setting.)
1. Display the INSTALLATION 1 menu.
2.
Select LAMP SELECT by pressing the S or T button.
1
2
LAMP SELECT
DUAL
3. Press the ENTER button.
4. Select DUAL by pressing the W or X button.
LAMP SELECT
1
2
LAMP SELECT
DUAL
5. Press the ENTER button.
6.
Select LAMP RELAY by pressing the S or T button.
LAMP RELAY
1H/24H
7. Select 1H/24H
or
2H/1W
by pressing the W or
X button.
1H/24H
.....Select this setting when the lamp
is operated at a specifi ed time of
the day. During the continuous
projection, LAMP 1 or LAMP 2 is
automatically turned off for 1 hour
in 24 hours. After the interval is set,
the lamps are turned off for 1 hour
alternately at the specifi ed interval.
Illuminating
Off
LAMP 1
LAMP 2
1
2 3 4 5 6 7 8 (days)
At the time of power-on or menu setting
2H/1W ......During the continuous projection,
LAMP 1 or LAMP 2 is automatically
turned off for 2 hours in a week.
After the interval is set, the lamps are
turned off for 2 hours alternately at
the specified interval.
Illuminating
Off
LAMP 1
LAMP 2
1
2 3 4 5 6 7 8 (days)
At the time of power-on or menu setting
8. Press the ENTER button.
When you select 1H/24H or 2H/1W , the
box to set the lamp relay interval is displayed.
When the projector is turned off, the setting is
cleared and the projector resumes operation
from the time of the power-on or menu setting
shown in the preceding step.
1H/24H
NEXT LAMP RELAY
23H
0
OK
CLEAR
DEL
CANCEL
12345678 9
2H/1W
NEXT LAMP RELAY
6D 22H
0
OK
CLEAR
DEL
CANCEL
12345678 9
9. Move the key cursor using the direction buttons to
select the number you want to enter and then press
the ENTER button.
• Maximum interval
1H/24H
..... 23H (23 hours)
2H/1W
...... 6D 22H (6 days and 22 hours)
m key: Shifting the position of enter cursor
to the left for each character.
o key: Shifting the position of enter cursor
to the right for each character.
DEL key: Deleting the character in the
position of enter cursor for each
character.
CLEAR key: Deleting all the entered characters.
You can enter the value by pressing the number
buttons (0 to 9) while holding down the NUM
button on the remote control.
When the value you entered meets the following
conditions, an error dialog box is displayed at
the screen center.
The value has been cleared by DEL or CLEAR
and left blank.
The value you entered is out of the setting
range.
1H/24H
.... 24H or over
2H/1W ..... 6D 23H or over
The value of each item is out of the setting
range.
D .................. 7 or over (2H/1W only)
H .................. 24 or over
10. When selecting OK, the setting is completed as
the lamp-switching interval stored. However, when
selecting CANCEL, the setting is completed without
storing.
The display returns the LAMP RELAY menu after
selecting OK or CANCEL.
The setting you made is applied to NEXT LAMP
RELAY in the INFORMATION menu.
Important:
When you use the projector continuously, the lamp
relay may not be performed on time due to errors of
the clock function.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi XD8100U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi XD8100U in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info