493655
51
Zoom out
Zoom in
Previous page
1/75
Next page
EN-51
6. When selecting OK, the setting is completed as
the IP ADDRESS stored. However, when selecting
CANCEL, the setting is completed without storing.
When the setting you entered is correct, the
setting change dialog is displayed. After the
dialog disappears, the NETWORK menu is
displayed. If the entered content is not correct,
IP ADDRESS screen appears again after an
error dialog is displayed.
It may take some time to refl ect the settings.
Subnet Mask Settings
1. Display the IP CONFIG menu.
2. Press the S or T button to select SUBNET MASK.
SUBNET MASK
0. 0. 0. 0
3. Press the W or X button to select SET .
4. Press the ENTER button.
SUBNET MASK screen appears.
SUBNET MASK
255 . 255 . 255 . 0
0
OK
CLEAR
DEL
CANCEL
12345678 9
5. Enter the Subnet Mask.
Refer to IP Address Settings for the detail of
entering.
6. When selecting OK, the setting is completed as
the Subnet Mask stored. However, when selecting
CANCEL, the setting is completed without storing.
When the setting you entered is correct, the
setting change dialog is displayed. After the
dialog disappears, the NETWORK menu is
displayed. If the entered content is not correct,
SUBNET MASK screen appears again after an
error dialog is displayed.
It may take some time to refl ect the settings.
Default Gateway Settings
1. Display the IP CONFIG menu.
2. Press the S or T button to select DEFAULT
GATEWAY.
DEFAULT GATEWAY
0. 0. 0. 0
3. Press the W or X button to select SET .
4. Press the ENTER button.
DEFAULT GATEWAY screen appears.
DEFAULT GATEWAY
10 . 132 . 1 . 1
0
OK
CLEAR
DEL
CANCEL
12345678 9
5. Enter the Default Gateway.
Refer to IP Address Settings for the detail of
entering.
6. When selecting OK, the setting is completed as the
Default Gateway stored. However, when selecting
CANCEL, the setting is completed without storing.
When the setting you entered is correct, the
setting change dialog is displayed. After the
dialog disappears, the NETWORK menu is
displayed. If the entered content is not correct,
DEFAULT GATEWAY screen appears again after
an error dialog is displayed.
It may take some time to refl ect the settings.
Enabling or disabling the network
certifi cation
You can select whether or not to certify the network
communication using the network password.
For details, contact your dealer.
(See page 32 for menu setting.)
1. Display the NETWORK menu.
2. Press the S or T button to select NET WORK
CERTIFICATION.
NETWORK CERTIFICATION
ON
3. Press the ENTER button.
• Confi rmation dialog appears.
NETWORK CERTIFICATION :
OK : ENTER CANCEL : MENU
ON
4. Press theW or X button to select ON or OFF .
5. Press the ENTER button.
To cancel the setting, press the MENU button.
It may take some time to refl ect the settings.
Setting the control system
Set the control system.
(See page 32 for menu setting.)
1. Display the NETWORK menu.
2. Press the S or T button to select CONTROL
SYSTEM.
CONTROL SYSTEM
STANDARD
3. Press the ENTER button.
CONTROL SYSTEM :
OK : ENTER CANCEL : MENU
STANDARD
4. Press theW or X button to select STANDARD ,
AMX , or CRESTRON .
STANDARD
Select this setting when using ProjectorView.
AMX
Select this setting when using the controller of
AMX. (See page 58.)
CRESTRON
Select this setting when using the controller or
software of Crestron Electronics, Inc. (See page 58.)
5. Press the ENTER button.
Initial network settings (continued)
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi XD8100U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi XD8100U in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info