493655
50
Zoom out
Zoom in
Previous page
1/75
Next page
EN-50
6. Enter the NEW NETWORK PASSWORD and
CONFIRM NETWORK PASSWORD.
Password can be set using up to 32 characters
including alphabets (capital/small) or numeric
characters.
m key: ............. Shifting the position of enter
cursor to the left for each
character.
o key: ............. Shifting the position of enter
cursor to the right for each
character.
key: ............... Shifting the position of
enter cursor between NEW
NETWORK PASSWORD
and CONFIRM NETWORK
PASSWORD.
DEL key: .......... Deleting the character in the
position of enter cursor for each
character.
caps/CAPS key:
Switching an alphabet character
to CAPITAL or small.
CLEAR key: ..... Deleting all the entered
characters.
You can enter numbers by pressing the number
buttons (0 to 9) while holding down the NUM
button on the remote control.
7. When NEW NETWORK PASSWORD and CONFIRM
NETWORK PASSWORD are matched, the setting
is completed after changing the NETWORK
PASSWORD.
When you select OK and the passwords you
entered are matched, the setting change dialog
is displayed. After the dialog disappears, the
NETWORK menu is displayed.
When you select CANCEL, the NETWORK menu
is displayed without changing the password.
If the entered content is not matched, NEW
NETWORK PASSWORD screen appears again
after an error dialog is displayed.
It may take some time to refl ect the settings.
IP Settings
(See page 32 for menu setting.)
1. Display the NETWORK menu.
2. Press the S or T button to select IP CONFIG.
IP CONFIG
ENTER
3. Press the ENTER button.
IP CONFIG menu appears.
IP CONFIG
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
MAC ADDRESS
ON
Initial network settings (continued)
Setting or Clearing DHCP
1. Display the IP CONFIG menu.
2. Press the S or T button to select DHCP.
DHCP
ON
3. Press the ENTER button.
• Confi rmation dialog appears.
DHCP :
OK : ENTER CANCEL : MENU
ON
4. Press the W or X button to select ON or OFF .
5. Press the ENTER button.
When you select OK, the setting change dialog
is displayed. After the dialog disappears, the
NETWORK menu is displayed.
To cancel the setting, press the MENU button.
It may take some time to refl ect the settings.
When setting DHCP to ON, IP ADDRESS,
SUBNET MASK, and DEFAULT GATEWAY
cannot be set. If you set those settings, set
DHCP to OFF and perform the IP settings as the
following procedures.
IP Address Settings
1. Display the IP CONFIG menu.
2. Press the S or T button to select IP ADDRESS.
IP ADDRESS
0. 0. 0. 0
3. Press the W or X button to select SET .
4. Press the ENTER button.
IP ADDRESS screen appears.
IP ADDRESS
192 . 168 . 0 . 10
0
OK
CLEAR
DEL
CANCEL
12345678 9
5. Press the direction buttons to move the key cursor,
select the numbers to enter, and press the ENTER
button.
Set the numeric value within the range from 0 to
255. However, set the numeric value for the fi nal
octet within the range from 1 to 254.
m key: Shifting the position of enter cursor to
the left.
o key: Shifting the position of enter cursor to
the right.
DEL key: Deleting the character in the position
of enter cursor for each character.
CLEAR key: Deleting all the entered
characters.
You can enter numbers by pressing the number
buttons (0 to 9) while holding down the NUM
button on the remote control.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi XD8100U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi XD8100U in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info