805477

Mitsubishi RC-EX3 - REMOTE CONTROL Manual

32
Zoom out
Zoom in
Previous page
1/46
Next page
−31−−30−
　
2 If a desired day of the week ① is tapped on the display, contents of current setting for the day are displayed. (☞5)
3 For the holiday setting, tap the block ② under a day to switch between “ ” (the holiday setting) and “(Blank)” (reset).
Timer does not operate on the day set as holiday.
Two or more holidays can be set.
■To enable the timer on the day set as holiday, it is necessary to reset the holiday setting.
4 When tapping ③ “All Disable” button, the timer does not operate on all days of the week.
When the timer is used, be sure not to set “All Disable”.
2
Peak-cut timer
Select the day of the week.
Invalid Setting:Tap box below day of week.
If invalid is selected, timer won't start
All Disable
Mon Tue Wed Thu Fri Sat Sun
Back
3
1
5 Screen to check contents of current
setting is displayed.
When the contents are changed or
new setting is added, select a ①
setting line No. and tap the ②
Change button.
6 Detail setting screen for the timer
setting contents is displayed.
① Tap the State button to switch
between “State Enable” and “State
Disable”.
② If the Change button is tapped,
the start time and the end time can
be set. (☞7)
③ If the Peak-cut button is tapped,
the peak-cut % can be set. (☞9)
7 Set the Start time.
Set the hour and minute with the
▲ ▼ buttons.
Setting time can be set at 5-min
intervals.
Tap the Set button after the
setting. (☞8)
8 Set the End time.
Set the hour and minute with the
▲ ▼ buttons.
End time can be set from 5 minutes
after the Start time up to 24:00 at 5-min
intervals
Tap the Set button after the
setting. (☞10)
Peak-cut timer
Set Back
Tap ▲▼ to set clock time & tap [Set].
Mon: No.1
Start time
AM
Peak-cut timer
Set Back
Tap ▲▼ to set clock time & tap [Set].
Mon: No.1
End time
AM
Peak-cut timer
Set Back
State
Disable
Select the item.
Mon: No.1
Change
Start time
End time
1
3
7:00 AM
8:00 AM
2
Select a line & tap [Change].
Change
Mon
Peak-cut timer
State
Enable
Disable
Disable
Disable
Start time End time
Enter Back
2
1
7:00 PM
7:00 AM
8:00 PM
8:00 AM
9 Set the peak-cut %.
Set the peak-cut % with the ▲
▼ buttons.
The peak-cut % can be set at 0%,
40%, 60% or 80%.
The lower the peak-cut % is,
the higher the effect of
energy-saving becomes.
Tap the Set button after the
setting. (☞10)
Peak-cut timer
Set Back
Tap ▲▼
to set peak-cut & tap [Set]
Wed: No.1
Peak-cut
10
The setting content check screen (☞
6) is displayed. If the Set
button is tapped, the contents are
confirmed and a day of the week
setting content check screen (☞5)
is displayed.
11 If the settings are corrected or added
further within the same day, repeat
the setting. (☞5)
■When contents of the setting are
duplicated, the priority is given to the set
contents of smaller peak-cut %.
Peak-cut timer
Set Back
State
Disable
Select the item.
Mon: No.1
Change
Start time
End time
7:00 AM
8:00 AM
12
Display a day of the week setting
content check screen. To save the
setting, tap the Enter button.
a) In case of group setting: (1-①
Weekdays, 1-②Sat, Sun, 1-③
All days) Move to the group
setting check screen. (☞13)
b) In case of individual setting:
(1-④Each day) Save the setting
and move to a day of the week
selection screen (☞2)
13
Display the group setting
acknowledge screen.
Tap the Yes button to save the
setting.
The display changes to a day of the
week setting check screen after the
saving. (☞2)
14 When making the setting after
changing a day of the week, repeat
the setting from the step 2.
Peak-cut timer
Yes
Back
Do you want to apply group setting?
Select a line & tap [Change].
Change
Weekdays
Peak-cut timer
State
Enable
Disable
Disable
Disable
Start time End time
Enter Back
8:00 AM
8:00 PM
7:00 AM
7:00 PM
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi RC-EX3 - REMOTE CONTROL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi RC-EX3 - REMOTE CONTROL in the language / languages: English as an attachment in your email.

The manual is 6.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mitsubishi RC-EX3 - REMOTE CONTROL

Mitsubishi RC-EX3 - REMOTE CONTROL User Manual - German - 46 pages

Mitsubishi RC-EX3 - REMOTE CONTROL Quick start guide - Dutch - 46 pages

Mitsubishi RC-EX3 - REMOTE CONTROL Quick start guide - French - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info