・ When returning to the screen mentioned below from each setting screen, operate the following buttons or switches.
■Return to Main screen …Menu button
■Return to the last previous screen …Back button
■Return to TOP screen …Run/Stop switch
・ When the Back button is tapped without tapping the Set button on the way of setting, contents of the setting are invalidated, and the display returns to the last previous
screen. If the Run/Stop switch is pushed on the way of setting, contents of the setting are invalidated, the setting mode is terminated and the display returns to the TOP
screen.
・ If no button is operated for approx. 5 minutes on the way of setting each item, the display returns to the TOP screen automatically. Contents of the setting on the way become
invalid.
・ Message “Invalid request” may be displayed when a button is pushed. This is not a fault but it is because the button is set to the Prohibition.
・ It is necessary to stop the air conditioner by pushing the Run/Stop switch before starting the following settings.
If the Set button is tapped on the menu screen while the air conditioner is operating, the message “Invalid request.” is displayed.
■Individual flap control ■Anti draft setting ■Select the language
■Energy-saving setting ■Administrator settings
Cautions for each setting screen
1 Tap the Menu button on the TOP screen and select Energy-saving setting. The Energy-saving setting menu screen is
displayed.
2 When the Energy-saving setting screen is displayed, select a desired item.
・Sleep timer
・Peak-cut timer
・Automatic temp set back
Infrared sensor control
Energy-saving setting [Administrator password]
■Sleep timer
Stops operation when the amount of time set has elapsed since the start of each operation.
1 Tap the Menu button on the TOP screen and select Energy-saving setting⇒Sleep timer. The Sleep timer screen
is displayed.
2 Select a desired time with ①▲▼ buttons. Setting range: 30 to 240 minutes, at 10-min intervals.
3 Tap the ②State button to switch between “State Enable” and “State Disable”.
・“Enable”: operation stops at the set time every time.
・“Disable”: the sleep timer does not operate.
Unless the Sleep timer is used, set at the “State Disable”.
4 After the setting, tap the ③Set button. The display returns to the Energy-saving setting menu screen.
Energy-saving setting
Sleep timer
Peak-cut timer
Automatic temp set back
Infrared sensor control
Back
Select the item.
Sleep timer
SetBack
min.
State
Disable
Tap ▲▼ to set the minutes & tap [Set].
A/C will stop at the set minutes later.
2
3
1
1 Tap the Menu button on the TOP screen and select Energy-saving setting⇒Peak-cut timer.
When the setting range selection screen for the peak-cut timer is displayed, select the day of the week to be set.
① Weekdays : Monday - Friday
② Sat. Sun : Saturday, Sunday(☞4)
③ All days : Monday - Sunday
④ Each day : Moves to the day of the week setting screen. (☞2)
■Peak-cut timer
Set the times to start and stop the capacity (upper limit) limiting operation and the peak-cut %.
· When the peak-cut timer is used, be sure to make the Clock setting in advance.
· The peak-cut timer control may not be performed depending on combination of IU and OU.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Mitsubishi RC-EX3 - REMOTE CONTROL at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Mitsubishi RC-EX3 - REMOTE CONTROL in the language / languages: English as an attachment in your email.
The manual is 6.18 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
Others manual(s) of Mitsubishi RC-EX3 - REMOTE CONTROL
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
