1 Tap the Menu button on the TOP screen and select Useful functions⇒Individual flap control, or tap the Change flap direction button on the TOP screen and
select Ind. flap control, and then enter the administrator password.
When one IU is connected to the R/C: ☞3
When two or more IUs are connected to the R/C: ☞2
Motion range (upper, lower, left, or right limit positions) of the flap at each blow outlet can be set to a desired range.
■When the R/C is set as the sub R/C, the individual flap control cannot be set.
Individual flap control
・Individual flap control should be set when the unit is stopped.
・When you perform Individual flap control while the unit is in operation, the acknowledge screen for unit stop is displayed.
Advice
2 When two or more IUs are
connected to the R/C, a list of IUs is
displayed. Tap the IU to be set.
IU select
NextBack
Select an IU address.
3 Select the number of the ap of which the motion range is changed. (☞4)
■When there are two or more flaps at the blow outlet, such as the FDT type, the flap at blow outlet No. ① will keep moving while the blow
outlet selection screen is displayed. The figure displayed on the screen shows the installed unit viewed from the floor side. Select the flap
based on this figure. When you have selected the blow outlet, the flap with the number you selected will move.
■You can set all flaps at once by tapping the Bat.set.button (except for FDKs with a left/right flap).
■When there is only one flap at the blow outlet, such as the ceiling suspended type only the flap that can be set will be displayed.
For an FDK with a left/right ap, select the upper/lower ap or left/right ap.
When you select the upper/lower ap (①): ☞4
When you select the left/right ap (②): ☞8
4 Select one of the upper limit positions
from 1 to 6 for the flap motion
range.
After you select the range, tap the
Set button.
Individual flap control Select flap
Bat.set.Back
Flap
❶
is in operation.
Individual flap control Select flap
Back
Flap❶ Swing range
Back
Select the upper limit No. & tap [Set].
Set
Upper limit setting
№④
№②
№①№③
配管側
ドレンホース側
制
御
箱
ルーバ№
［FDTの場合］
Pipe side
Control box
Drain hose side
Louver No.
[For FDT]
5 Select one of the lower limit positions
from 1 to 6 for the flap motion
range.
The range of motion between the
upper and lower limit positions will be
displayed in black.
After you select the range, tap the
Set button.
Flap❶ Swing range
Back
Select the lower limit No. & tap [Set].
Set
Lower limit setting
Flap❷ Swing range
Back
Select the left limit and tap [Set].
Set
Left limit setting
8 Select one of the left limit positions
from 1 to 5 for the ap motion
range.
After you select the range, tap the
Set button.
6 Acknowledge screen for the flap
motion range is displayed.
7 Acknowledge screen for the completion
of setting is displayed.
To change other ap motion ranges,
tap the Yes button (☞3).
To terminate the setting, tap the
No button. The display returns to
the TOP screen.
Flap❶ Swing range
Back
Tap [Back] for resetting.
Yes
Do you want to set the
range of flap motion?
If yes, tap [Yes].
Flap❶ setting is completed
No
Tap [No] to return to top screen.
Yes
Setting the range of flap❶
motion is complete.
Do you want to set other flaps?
[When left/right ap is selected for an FDK with a left/right ap]
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Mitsubishi RC-EX3 - REMOTE CONTROL at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Mitsubishi RC-EX3 - REMOTE CONTROL in the language / languages: English as an attachment in your email.
The manual is 6.18 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
Others manual(s) of Mitsubishi RC-EX3 - REMOTE CONTROL
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
