31038
41
Zoom out
Zoom in
Previous page
1/80
Next page
39
6 Program to record menu appears. Turn the ADJUST dial to choose the
channel you would like to record. Turn the SHUTTLE ring to the right.
Select External L1 if you connect an integrated HDTV or an IEEE 1394-
equipped HDTV receiver to the rear panel.
Select External L2 if you connect an integrated HDTV or an IEEE 1394-
equipped HDTV receiver to the front panel.
7 Day will flash. Turn the ADJUST dial to choose the day on which you want to
record; for example, Monday the 12th.
Your choices are:
a single day up to one month away.
every day from Monday through Friday; for example, to tape a soap opera.
To program, turn the ADJUST dial until Monday-Friday appears.
the same day every week; for example, to tape your favorite weekly sitcom.
To program, turn the ADJUST dial until Every and the desired day of the
week appears.
Turn the SHUTTLE ring to the right once you have made your choice.
8 The hour numbers of the start time will flash. Turn the ADJUST dial to set the
hour when recording is to start. Turn the SHUTTLE ring to the right.
9 The minute numbers of the start time will flash. Turn the ADJUST dial to set
the minutes when recording is to start. Turn the SHUTTLE ring to the right.
10 Set the stop time the same way as the start time, using steps 8 and 9.
11 Turn the ADJUST dial to set the recording speed:
SP = standard play; EP = extended play; AUTO = auto. Auto speed
programming is discussed on page 48. Turn the SHUTTLE ring to the right.
IMPORTANT
If you turn the SHUTTLE ring to the right when you set the timer recording
incompletely, Program is not completed will appear on your screen.
If two programmed recording times overlap, VCR is already programmed for
that time will display on your screen for about 3 seconds, and then the Recap
screen will appear. The program you have just set will flash for 3 seconds
and the start time and the stop time will be shown in red letters. The start
and stop time of the overlapped program will be highlighted in red color. You
will need to erase one of them.
12 The programmed memory will appear on the Recap screen.
13 To program additional recording times, select an empty program line by turning
ADJUST dial. Turn the SHUTTLE ring to the right. The VCR Plus+ system
menu will appear. Continue the programming procedure from step 5.
14 When you are finished with all programming, check the following:
Leave an integrated HDTV or an IEEE 1394-equipped HDTV receiver turned ON.
Turn the VCR power OFF and make sure the programmed recording light is lit.
IMPORTANT
While the VCR is recording a digital broadcast, please do not change the
channel on an integrated HDTV or an IEEE 1394-equipped HDTV receiver.
The menu or the program list of an integrated HDTV or an IEEE 1394-
equipped HDTV will be recorded if it is displayed during recording.
If you record a digital broadcast in analog format, the picture quality will not
be as clear as that of the original digital broadcast.
If you record a copy protected digital program, the copy protect data will also
be recorded.
Timer Recording
¬Program to record
ƒChannel External L1
ƒDay Monday 12
ƒStart time 11:00am
ƒStop time --:--
ƒRecord speed AUTO
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER.
Press MENU to go back.
¬Program to record
ƒChannel External L1
ƒDay Monday 12
ƒStart time 11:30am
ƒStop time 1:30pm
ƒRecord speed SP
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER.
Press MENU to go back.
Recap screen
¬Program to record
CH DAY ON OFF
10 TH15 9:00p10:30pSP
§ L1 MO12 11:30a 1:30pSP
--- -- --:-- --:-- SP
--- -- --:-- --:-- SP
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER.
Press MENU to go back.
¬Program to record
ƒChannel External L1
ƒDay --
ƒStart time --:--
ƒStop time --:--
ƒRecord speed AUTO
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER.
Press MENU to go back.
¬Program to record
ƒChannel External L1
ƒDay Monday 12
ƒStart time --:--
ƒStop time --:--
ƒRecord speed AUTO
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER.
Press MENU to go back.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi HSHD2000U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi HSHD2000U in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info