Manual Mitsubishi HSHD2000U (page 39 of 80) (English)

31038

Zoom out

Zoom in

1/80

Mitsubishi offers 6 ways to set your VCR to record upcoming broadcasts. Choose

from:

D-VHS Timer Recording

Analog Timer Recording of Digital Broadcast

VCR Plus+ system programming (easy)

On LCD programming

Conventional VCR timer recording

Quick Program (easy) -- VCR does not need to be on to begin programming

You can schedule up to 8 recording events within a one month period.

Clock must be set before any timer recordings can be performed.

D-VHS Timer Recording

To set the timer recording of the digital broadcast in D-VHS format, set the timer

recording on the integrated HDTV or on the IEEE 1394-equipped HDTV receiver,

not on the VCR. Refer to your TV or receiver owner’s guide.

1 Follow the steps 1 to 4 of Setting Up Your VCR to Playback/Recording the

Digital Broadcast in D-VHS format on page 12.

2 Load a D-VHS tape with its erasure prevention tab intact into the VCR.

3 Make sure that the D-VHS button on the front panel is lit. If not, press this

button until it lights up.

4 Press POWER on the VCR front panel or on the remote control to turn off the

VCR.

5 Set the timer recording on the integrated HDTV or on the IEEE 1394-equipped

HDTV receiver. Refer to your TV or receiver owner’s guide for this procedure.

The integrated HDTV or the IEEE 1394-equipped HDTV receiver will receive the

program to be recorded on the start time you have set and send the signal to start

recording to the VCR. The VCR will start recording automatically. The integrated

HDTV or the IEEE 1394-equipped HDTV receiver will send the signal to stop

recording to the VCR on the end time you have set, and the VCR will stop record-

ing automatically.

IMPORTANT

The recording mode will be changed automatically depending on the

broadcasting signal.

Depending on your integrated HDTV or IEEE 1394-equipped HDTV receiver,

the programmed D-VHS recording may not be recorded if you turn on the

VCR while it is in stand-by mode for the D-VHS timer recording.

The programmed D-VHS timer recording may not be recorded correctly

depending on your integrated HDTV or IEEE 1394-equipped HDTV receiver.

When you connect more than one integrated HDTVs or IEEE 1394-equipped

HDTV receivers, the D-VHS timer recording of only one integrated HDTV or

IEEE 1394-equipped HDTV receiver will be activated. In this case, while the

VCR is in stand-by mode for the D-VHS timer recording, press INPUT on the

VCR remote to set the VCR’s input to the tuner or press IEEE 1394 INPUT to

select d1 to d5 which corresponds to the receiver or the TV from which you

would like to record.

Timer Recording

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi HSHD2000U in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mitsubishi HSHD2000U Manual

Product: