31038
42
Zoom out
Zoom in
Previous page
1/80
Next page
40
Timer Recording
Conventional VCR Timer Recording
1 Load a tape with its erasure prevention tab intact into the VCR.
2 Press MENU. VCR Main Menu appears on your screen. Turn the ADJUST
dial to select Program to record. Turn the SHUTTLE ring to the right.
If there is at least one programmed recording already entered, you will see the
Recap screen. Wait 4 seconds, and the VCR Plus+ system menu will appear.
IMPORTANT
If you have already programmed 8 recording events, Program memory is full
will appear on your screen for 3 seconds, and then the Recap screen will
appear. Use CANCEL to erase an entry before you can add another one.
3 VCR Plus+ system menu appears. See page 42 to learn how to program with
VCR Plus+ system. To pass this screen, turn the SHUTTLE ring to the right.
4 Program to record menu appears. Turn the ADJUST dial to choose the
channel you would like to record; for example, channel 2. Turn the SHUTTLE
ring to the right.
If you are using a cable box that the VCR cannot control, enter the channel
number on which the cable box sends a signal to your VCR (usually channel
3 or 4).
If you are recording from a DSS
®
, PRIMESTAR
®
or DISH Network
satellite
receiver, simply choose the channel you would like to record; for example,
channel 245. SAT will display next to the channel number.
To record from an external source, press INPUT or turn the ADJUST dial to:
Select External L1 for a source connected to the rear panel.
Select External L2 for a source connected to the front panel.
5 Day will flash. Turn the ADJUST dial to choose the day on which you want to
record; for example, Monday the 12th.
Your choices are:
a single day up to one month away.
every day from Monday through Friday; for example, to tape a soap opera.
To program, turn the ADJUST dial until Monday-Friday appears.
the same day every week; for example, to tape your favorite weekly sitcom.
To program, turn the ADJUST dial until Every and the desired day of the
week appears.
Turn the SHUTTLE ring to the right once you have made your choice.
6 The hour numbers of the start time will flash. Turn the ADJUST dial to set the
hour when recording is to start. Turn the SHUTTLE ring to the right.
7 The minute numbers of the start time will flash. Turn the ADJUST dial to set
the minutes when recording is to start. Turn the SHUTTLE ring to the right.
8 Set the stop time the same way as the start time, using steps 6 and 7.
¬Program to record
ƒChannel 2
ƒDay Monday 12
ƒStart time 11:00am
ƒStop time --:--
ƒRecord speed AUTO
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER.
Press MENU to go back.
¬Program to record
ƒChannel 2
ƒDay Monday 12
ƒStart time --:--
ƒStop time --:--
ƒRecord speed AUTO
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER.
Press MENU to go back.
ªVCR Main Menu
¬Program to record
ƒ1394 connection list
√Customize choices
»S-VHS Set-Up
ƒFirst Time Set-Up
Use ADJUST to select,
and ENTER.
Press MENU to exit menus
¬VCR Plus+ system
Use number keys to enter
the PlusCode number
--------
or press ENTER to
program.
Press MENU to go back.
¬Program to record
ƒChannel 2
ƒDay --
ƒStart time --:--
ƒStop time --:--
ƒRecord speed AUTO
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER.
Press MENU to go back.
¬Program to record
CH DAY ON OFF
10 TH15 9:00a10:30pSP
§--- -- --:-- --:-- SP
--- -- --:-- --:-- SP
--- -- --:-- --:-- SP
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER.
Press MENU to go back.
Recap screen
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi HSHD2000U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi HSHD2000U in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info