31038
22
Zoom out
Zoom in
Previous page
1/80
Next page
20
IMPORTANT
Automatic channel programming using ALLSET may include vacant channels
if there are stray signals or noise on those channels. If this occurs, you can
manually delete the channels using the procedure in the section Adding and
Deleting Channels.
You do not need to perform this set-up again unless your cable company
changes their channel lineup, or you move the VCR to a new address.
After a power failure, if you have set Clock set within the Set the clock menu
to AUTO, then ALLSET will automatically set the clock again.
Once the VCR has completed the ALLSET set-up, it can automatically set the
clock, including your time zone and daylight saving time. In order for the
auto clock function to work, the Clock set within the Set the clock menu must
be set to AUTO. Follow ALL the steps in Setting the Auto Clock.
Satellite Receiver Control
If you are using a satellite receiver, you can set up your VCR to change channels
on the satellite receiver.
1 Make sure you are viewing the picture coming from your VCR. Press MENU
on the remote control. VCR Main Menu appears.
2 Turn the ADJUST dial on the remote control to select First Time Set-Up. Turn
the SHUTTLE ring to the right.
3 You will see the First Time Set-Up menu. Turn the ADJUST dial to select Sat.
receiver.
IMPORTANT
You cannot select Sat. receiver if you select Digital Cable box only in step 4
of ALLSET (on page 17).
4 Turn the SHUTTLE ring to the right to select the correct code for your satellite
receiver.
Manufacturer Code
GE 1
RCA 1, 8
PRIMESTAR
®
2
Sony 3
DISH Network 4
Toshiba 5
Panasonic 6
Mitsubishi/Hughes 7
none OFF
5 After you have selected, press MENU twice to exit the menus.
IMPORTANT
After you have connected the satellite receiver and set the brand code, you
need to see if your VCR can control your satellite receiver. To do this, use
CHANNEL or number buttons on the VCR remote to tune to a satellite
channel. If the satellite channels appear on your TV, then your VCR can
control your satellite receiver.
Setting Up Your VCR
ƒFirst Time Set-Up
∆AllSet
≈Set the clock
«Add/delete channels
±Sat.receiver (OFF)
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER to change.
Press MENU to go back.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi HSHD2000U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi HSHD2000U in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info