31038
20
Zoom out
Zoom in
Previous page
1/80
Next page
18
7 When the brand code is correct, turn the shuttle ring to the right. The screen
will add a Channel selection.
8 Use the ADJUST dial to select the channel on which your cable box or digital
cable box sends a signal to the VCR (normally channel 3 or 4). If you
connected your cable box or digital cable box with audio/video cables, use
INPUT to select L1 (if you used the rear panel jacks), or L2 (if you used the
front panel jacks). You cannot use both digital cable box and satellite receiver.
Thus if you selected Digital cable box only in step 4, you cannot select L2.
9 After entering the channel number, turn the SHUTTLE ring to the right. The
VCR will begin memorizing the available channels. During this process your
TV screen, the front panel display, and your cable box or digital cable box
should all display each channel number one by one.
10 When the VCR is finished memorizing, you will see the screen for entering your
zip code. Use the number keys to enter your zip code. For example, if your
zip code is 92618, press 9-2-6-1-8.
If you enter a number incorrectly, turn the SHUTTLE ring to the left or press
CANCEL.
When you have finished entering the zip code, turn the SHUTTLE ring to the
right.
The VCR will begin to search for a channel that carries a time signal to set the
clock. If the VCR can find the channel, it will set the clock. You can see if the clock
has been set on the front panel display of your VCR.
The clock setting set up time varies, it may take up to 30 minutes as the VCR
searches one by one for a channel that carries a time signal.
If the VCR will not set the clock (the current time display still shows – –:– –), see
Setting the Clock on page 23.
11 Once the VCR has set the clock, it shows the message indicating that the first
step is completed. Then, press POWER to turn off the VCR and leave the
VCR off for the night. The full set-up will be completed overnight (from about
Midnight to 7:00AM).
During this time, the VCR will search for a channel that carries data to set the
VCR Plus+ guide channel numbers for your area and then check the guide
channel number against the channel number you receive in your home and
select the correct lineup automatically.
IMPORTANT
If you use a cable box or digital cable box, you will need to leave your cable
box or digital cable box ON at all times.
Setting Up Your VCR
∆AllSet
Your cable box sends a 
signal on which channel?
ƒBrand code 1
ƒChannel 3 
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER.
Press MENU to go back.
∆AllSet
Use number keys to enter
ZipCode
92618
Press ENTER when done.
Press CANCEL to erase 
the ZipCode.
Press MENU to go back.
∆AllSet
Now memorizing all the 
stations you can receive
Channel 3
Stand by this may take
a few minutes 
To cancel memorization,
press CANCEL
∆AllSet
1st Step in Progress...
Please Wait.
Press MENU to go back.
∆AllSet
1st Step successful.
Please leave
your VCR Off Overnight 
AllSet will be 
completed Overnight
Press MENU to go back.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi HSHD2000U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi HSHD2000U in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info