31038

Mitsubishi HSHD2000U Manual

23
Zoom out
Zoom in
Previous page
1/80
Next page
21
Adding and Deleting Channels
If necessary, you can manually add or delete channels after you have completed
the automatic channel memorizing by using ALLSET. You cannot do this for chan-
nels coming from a satellite receiver.
1 Make sure that video mute is ON. See page 60.
2 Set the VCR’s input to tuner. To do this, press INPUT on the remote control
until a channel number appears on the screen or the front panel display.
3 Press MENU on the remote control. VCR Main Menu appears.
4 Turn the ADJUST dial on the remote control to select First Time Set-Up. Turn
the SHUTTLE ring to the right.
5 You will see the First Time Set-Up menu. Turn the ADJUST dial to select Add/
delete channels. Turn the SHUTTLE ring to the right.
IMPORTANT
If you are recording, playing back a tape, receiving a video signal from an
external input, or watching a satellite receiver channel, then Not available will
flash on-screen. To correct this, stop the tape or turn off the menus and
switch the VCR’s input to tuner.
6 You will see the screen for adding or deleting channels. Use the ADJUST dial
to select the channel that you want to add or delete. Press ENTER or turn the
SHUTTLE ring to the right to add the channel; press CANCEL or turn the
SHUTTLE ring to the left to delete it.
7 When you are finished adding or deleting channels, press MENU three times to
exit the menus.
IMPORTANT
If you use ALLSET to memorize channels again, you will lose all of the
manual changes you made. All of the channels you deleted will be added; all
of the channels you added will be deleted. If your cable box receives only
one or two digit channels, you cannot add a three-digit channel.
Setting Up Your VCR
«Add/delete channels
Channel 39
Not in memory
Use ADJUST to select
a channel. Use ENTER
to add it, CANCEL to
delete it.
Press MENU to go back.
ƒFirst Time Set-Up
∆AllSet
≈Set the clock
«Add/delete channels
±Sat.receiver (OFF)
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER.
Press MENU to go back.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi HSHD2000U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi HSHD2000U in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info