295785
60
Zoom out
Zoom in
Previous page
1/69
Next page
SELF-TIMER
117
SETTING FILM SPEED MANUALLY
116
The self-timer delays the release of the shutter for approximately
10 seconds after the shutter-release button is pressed.
Place the camera on a tripod,
then press the self-timer/drive-
mode button in the control
panel.
Turn either control dial until
appears in the data panel.
Press the shutter release
button partway down to enter
the setting.
Center your subject in the focus frame, then press the
shutter-release button all the way down to start the timer.
• The self-timer lamp will blink after the shutter-release button is
pressed. Three seconds before the picture is taken, the self-timer
lamp will blink rapidly.
• To cancel the self-timer before taking the picture, slide the main switch to
LOCK.
• The self-timer is cancelled automatically after the shutter is released.
• If you are not looking through the viewfinder when the shutter-release
button is pressed, light entering the eyepiece may affect the camera's
automatic exposure settings. To prevent this, attach the eyepiece cap
before starting the self-timer (p 11).
Customized Function #4 - DX Memory
Setting 1 - DX Memory is on.
Setting 2 - DX Memory is off. The camera will not automatically
change the ISO of any DX-coded film. See page 102.
DX Memory
If you change the ISO of a DX-coded roll of film, the new speed
is recorded and used for all following rolls with the same initial
film speed. This is called DX Memory.
Example: You manually change the film speed of a DX-coded roll
of ISO 100 film to ISO 400. The next time you insert a DX-coded
roll of ISO 100 film, the camera automatically resets the ISO to
400.
The default DX Memory setting is ON.
2152EE 17/10/97 11:01 AM Page 116
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Minolta dynax 800 si at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Minolta dynax 800 si in the language / languages: English as an attachment in your email.

The manual is 2,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info