295785
58
Zoom out
Zoom in
Previous page
1/69
Next page
113
FOR OWNERS OF THE QUARTZ DATE MODEL
112
Press the ADJUST button to change the
data to the correct value. Data continues
changing as long as the button is held down.
• In time mode, pressing the ADJUST button while : is
blinking resets the second counter to 00.
When all data is correct, press the SELECT
button until the data stops blinking.
• The print indicator will flash for 2 seconds after the
picture is taken to indicate that the data was imprinted.
Imprinted data may be difficult to read if the lower-right corner of the
photograph is bright or non-uniform.
• Imprinting position and size may differ according to printing conditions.
• Do not use the data back when temperatures exceed the operating
range of 0° to 50° C (32° to 122° F).
REPLACING THE QUARTZ DATA BACK BATTERY
Slide the battery cover in the
direction indicated.
Remove the old battery and
replace it with a new one.
• The + side should face up.
Replace the battery cover, then reset the date and time.
The quartz data back uses a CR2025 lithium battery, located on the inside
of the back cover. Replace the battery if the display changes or becomes
dim while the camera batteries are removed.
The Quartz-data function enables you to record the date or time
onto the lower-right portion of the photograph. The 800si has an
automatic calendar through the year 2019.
In this section, when the ADJUST button is referred to, it is the ADJUST button
for the Quartz Data function. It is not the adjust button in the control panel.
SETTING THE DATE AND TIME
Press the MODE button to choose the data
imprinting format.
• M will appear above the month.
• The display will change as follows:
Use the SELECT button to move between
different parts of the displayed data. The
selected part will blink, indicating that it is the
data to be changed.
year, month, day
24-hour format
no imprinting
day, month, year
month, day, year
Print
indicator
ADJUST
button
SELECT button
MODE
button
2152EE 17/10/97 11:01 AM Page 112
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Minolta dynax 800 si at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Minolta dynax 800 si in the language / languages: English as an attachment in your email.

The manual is 2,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info