295785
62
Zoom out
Zoom in
Previous page
1/69
Next page
ACCESSORY INFORMATION
121
PROGRAM RESET BUTTON
120
The Minolta 800si was designed to work specifically with lenses,
flash units and other accessories manufactured and distributed by
Minolta. Using incompatible products with this camera may result
in unsatisfactory performance or damage to the camera or
accessories.
COMPATIBILITY OF LENSES AND ACCESSORIES
Lenses
All Minolta AF lenses can be used with this camera.
Manual focus lenses (MD or MC) cannot be used with the 800si.
If using an AF Zoom xi or AF Power Zoom lens, display the
current focal length of the lens by pulling the zoom ring toward
the camera body. If eye-start is off, the focal length can be
displayed by pressing the shutter-release button partway down
while pulling the zoom ring.
Flash Units
All Minolta i, si, and HS series flash units, as well as the Vectis
SF-1 flash, are compatible with this camera. With these flash
units, the flash always fires when the flash unit is on. (Unless
Customized Function #6 is on setting 2; Autoswitchover. In this
case, the flash will fire only when necessary when it is on and the
camera is in P mode.)
For AF series flash units (4000AF, 2800AF, 1800AF, and Macro
flash 1200AF), the Flash Shoe Adapter FS-1100 is required.
When the flash is on, it will fire every time the shutter is released.
The AF illuminator will not activate.
X-series flash units can only be used when connected to the
camera's PC terminal by a sync cord.
Press the program-reset button to return the following camera
functions to their program settings.
Function Program Setting Page
Exposure mode P mode 51
Subject Program None (P mode) 51
Focus area
Wide 67
Focus Autofocus
31
AF Mode Automatic autofocus 64
Metering mode 14-segment honeycomb pattern
Exposure compensation +/– 0.0 74
Flash compensation +/– 0.0 91
Film-drive mode Single frame advance 118
Self-timer Off 117
Wireless Flash Off 92
Rear-flash Sync Off 89
Shutter-release mode Autofocus priority 69
• The program-reset button will not change:
- Red-eye Reduction (on/off)
- Data Memory (on/off)
- Film Speed (ISO setting)
• If you have a dedicated accessory flash attached to the 800si, pressing
the program-reset button will also return it to its own program settings.
Refer to the flash instruction manual for details.
71
Continued on next page.
2152EE 17/10/97 11:01 AM Page 120
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Minolta dynax 800 si at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Minolta dynax 800 si in the language / languages: English as an attachment in your email.

The manual is 2,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info