579590
18
Zoom out
Zoom in
Previous page
1/86
Next page
UK
16
Compatible Systems
The XTC-270 can be used on both Windows operating system and MAC.
The video codec is H.264, the file format is .MP4.
Downloading Videos
There is no need to install any software with the XTC-270. It is a plug and play device.
1. Before downloading videos, ensure batteries are fully charged.
2. Connect the camera to the USB port using the included cable.
3. Turn on the camera by sliding the “Record” switch in ON position.
4. The camera will be automatically recognized as an external hard drive (USB key) but videos could only be download; it is not
possible upload any data on your SD card based on current EU law.
5. All your videos will be saved into the “DC IM” > “100Media”.
Reformatting the Micro SD card
Note: Format the micro SD card from the camera before the first usage.
The Micro SD card can be reformatted while in the camera. This allows you to delete all the videos at one time. Follow these steps:
1. Turn OFF the camera, sliding the RECORD switch to the OFF position.
2. Press and HOLD the Micro SD card reformat button.
3. Move the RECORD switch to the record position holding the reformatting button.
4. Release the reformatting button when the memory card LED is blinking green.
5. Turn OFF the camera, sliding the RECORD switch to the OFF position.
6. You will hear two beeps if the formatting process is successful.
7. Take out the Micro SD Card and use other device to format the card before using it again in the camera (Note: XTC270 cannot
delete the upgrade software)
Note: The camera cannot reformat the Micro SD card if the low battery light is on. Ensure new batteries are installed in the camera
before attempting the reformat process.
Note: XTC-270 is designed to be your ideal partner during all your adventures, so the CPU is totally turned OFF when the record
button is in OFF position to maximize the battery last. Due to this IT IS NOT POSSIBLE to set time and data.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland XTC 270 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland XTC 270 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info