Manual Midland XTC 270 (page 17 of 86) (English, German, Dutch, French, Italian, Portuguese, Spanish)

579590

Zoom out

Zoom in

1/86

Camera Mounting

Mount on Dual Track System

The XTC-270 was innovatively designed with an

identical dual track mount system on either side of

the camera. This allows an ease of installation. To

mount the camera on the dual track mount, slide

the camera onto the dual track system with the

two notches on the mount facing towards the back

of the camera.

To detach the camera from the dual track mount,

hold the camera with the lens facing away from

you. Press down the mount release switch and pull

the mount towards yourself.

The dual track mount allows the camera to be ea-

sily mounted on the helmet mount and on all other optional accessories with same type of slides. When mounting the camera on the

dual track mount, you must do the following:

1. Consider what you would like to shoot and use the helmet mount or goggle mount accordingly.

2. Ensure, once attached, that the camera is aimed straight and not towards the ground or at the sky.

Mount using the Thread Mount

On the bottom of the XTC-270 there is a stan-

dard thread mount that allows the camera to be

mounted on optional accessories that has standard

camera screw.

To ﬁx the camera, insert the screw on the mount

into the camera thread and rotate the camera

clockwise to tighten down onto the screw.

When mounting the camera on the handlebars of a

bike or with the vented helmet strap mount follow

these steps:

1. Consider what you would like to shoot and

mount accordingly.

2. Ensure, once attached, that the camera is aimed straight and not towards the ground or at the sky.

dual track system mount

Release button

Helmet adhesive mount Goggle mount

Camera thread Mounting screw

Helmet strap mount Bicycle handle bar mount

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland XTC 270 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland XTC 270 Manual

Product: