543256

Midland G12 Manual

23
Zoom out
Zoom in
Previous page
1/32
Next page
23
English
respectively during transmission and reception. If you communicate
withother deviceswhichdo nothavea companderfunction,it is
advisabletokeepit disabled. Otherwise, ifyoucommunicatewith
other MIDLAND G12youcanenableitbydoingthefollowing:
1) Press ten times the
MENU button. The display shows CPd
(Compander)followedby
n(disabled)orY(enabled)ashing.
2) Pressthe
+ or – buttons to select the desired setting.
3) Pressthe
PTTbuttontoexit,orwaitforafewseconds.Thedevice
goes in standby mode storing the new settings.
2 If you enable the compander function, all other devices with which
you correspond must do the same otherwise the quality of the
sound could be worsened instead of being improved.
6.8 Timeout timer
If you remain in transmission for too long you could discharge the
batteries too rapidly and you could prevent others from making urgent
calls since you are keeping the channel busy and only one party can
talk at one time. For this reason you can program your
MIDLAND
G12(ortheoneoftheotherparty)withtimeouttimer.Thisfunction
temporarily blocks transmission if this exceeds a preset duration.
1) Presseleventimesthe
MENU button. The display shows tOt (Time
OutTimer)followedby
n(timerdisabled)orbytimercorrectlyset
between 20 and 180 seconds.
2) Pressthe
+ or – buttons to select the desired setting.
3) Pressthe
PTTbuttontoexit,orwaitforafewseconds.Thedevice
goes in standby mode storing the new settings.
Iftimeouttimerisenabled,thedisplayshowsthe
icon. When you
arenearingtheendofthepresettimeoutyouwillbenotiedbya
series of warning beeps that transmission time is coming to an end
and you should release the
PTT button to go into reception mode.
When the time is over the transceiver is forced back into reception
mode.
2 It is possible to employ the timeout with a further function obtaining
a more sophisticated use. The “Penalty time” is set in the manner
described below.
2 This function is particularly useful when you are communicating
with a party inexperienced in radio communication.
6.9 Forced reception time
It is possible to set MIDLAND G12 so that when the timeout timer
isinprogress(refertopreviousparagraph),itisnotonlynecessary
to release the
PTTbuttontobeabletotransmitagain,butalsoitis
necessarytoremaininreceptionforapredenedtime(thatiswithout
pressing
PTT).Tosetforcedreceptiontimedothefollowing:
1) Press twelve timesthe
MENU button. The display shows PtY
(PenaltyTime)followedby
n(penaltytimedisabled)orbytimer
correctly set between 20 and 180 seconds.
2) Pressthe
+ or – button to select the desired setting.
3) Pressthe
PTTbuttontoexit,orwaitforafewseconds.Thedevice
goes in standby mode storing the new settings.
If,forexample,yousettheTimeoutTimertobe60secondsandthe
compulsoryreceptiontimetobe30seconds,theradiocantransmit
for 60 seconds after which time the transceiver is forced in reception
mode. In order to transmit again you have to release the
PTT
buttonandwaitanother30seconds.Whentransmissionisenabled,
MIDLAND G12 gives an audio signal.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland G12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland G12 in the language / languages: English as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info