543256

Midland G12 Manual

24
Zoom out
Zoom in
Previous page
1/32
Next page
24
English
7 Programming frequencies and
CTCSS/DCS codes
7.1 Programming modes
Youcanredeneradiofrequencies(choosingthemamongtheeight
PMR446frequenciesmentionedinpar.5.5.a)factorysetforeachone
of the 16 channels and allocate to each one a CTCSS tone or DCS
code. For further details on the PMR446 frequencies and CTCSS/
DCS consult par. 5.7 and the tables in chapter 11.
Toenterprogrammingmodedothefollowing:
1) Turnoffthetransceiver.
2) Keep the
PTT and SCAN/MON buttons pressed and turn the
device back on. All symbols on the display light up for about one
secondandabeepsoundofconrmationisheard.
3) Whenthedisplaycomesbacktoitsnormalstatus,releasethe
buttons. The display will show the
icon to signal that you
are in programming mode.
Toexitprogrammingmode(andstoresthenewsettings)pressthe
PTT button or turn the device off and then turn it back on.
WARNING! It is advisable to leave the rst eight channels
unchanged so as to keep maximum compatibility with devices of
other manufactures which are normally set in the same way.
7.1.a Setting of radio frequencies and of CTCSS/DCS
1) Gointoprogrammingmodeasdescribedabove(thedisplayshow
).Ontheleftyouwillbeabletoreadtheashingnumber
of the channel and on the right the(smaller)numberequaltothe
radio frequencyprogrammedaccordingtothefollowingtable:
Num. FREQUENCY(MHz) Num. FREQUENCY(MHz)
1 446.00625 5 446.05625
2 446.01875 6 446.06875
3 446.03125 7 446.08125
4 446.04375 8 446.09375
E.g.. 11 3 = channel 11 programmed with radio frequency 3
(446.03125MHz)
2) Pressthe
+ or – button to select the channel to program (from 1
to16).
3) Pressthe
MENU button. The smaller number corresponding to
thecurrentradiofrequencyashesontheright.
4) Ifyouwishtochangetheradiofrequencypressthe
+ or – button
until you have reached the desired frequency.
5) Atthispoint:
• Ifnomorechangingarerequiredgotostep2).
• If you wish to change the frequency of another channel press
twice the
MENU button and repeat operation from step 2.
• If you wish to programme/change CTCSS tone or DCS code
of the currently selected channel carry on with the following
step.
6) Accordingtothepredenedsettingofcurrentlytunedchannel,on
therightthedisplayshows:
• coF or doF - channel is not set with CTCSS or DCS (open
trafc)
• c followed by number XX - the channel has been programmed
with a CTCSS tone with number XX
• d followed by number XX - the channel has been programmed
with DCS code number XX
7) Pressthe
+ or – button to choose desired setting. There are 38
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland G12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland G12 in the language / languages: English as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info