543256

Midland G12 Manual

17
Zoom out
Zoom in
Previous page
1/32
Next page
17
English
5.10 Keypad lock
During normal use you can lock the transceiver’s keypad in order to
avoid accidental activation of any function.
To activate the keypad lock, hold down the
CALL/LOCK button
for about three seconds until the
symbol appears on the display
(bottom right). This will deactivate all buttons of the transceiver
except transmission (
PTTbutton),call(CALL/LOCKbutton)andthe
monitor (
SCAN/MONbutton-ref.par.5.8).Anyattempttoaccess
the disabled buttons while in this mode will cause an audio error
signal(lowtone).
To deactivate the keypad lock keep the
CALL/LOCK button pressed
for about three seconds until the
symbol disappears.
2 It is not possible to lock the keypad when the device is scanning
or in Dual watch mode.
5.11 Audio call function
You can send an audio call on the selected channel. You can do this
bypressingbrieythe
CALL/LOCK button. Your device will stay in
transmissionmodefortwoseconds,broadcastingthecall(toattract
theattentionoftheotherparty)andthenitautomaticallygoesback
to reception.
2 During transmission of the call the speaker of your device will also
play the call melody as conrmation.
2 You can select any of the 10 preset melodies.
2 Audio call is a special feature of MIDLAND G12. For this reason it
is advisable to warn and check with the other party about it so that
unnecessary interferences may be avoided.
5.11.a Silent calls
If you are communicating with another MIDLAND G12,youcancarry
out silent calls!To dothis,you enablethevibrating alerton your
device as described in par. 6.4. Once you have switched to vibrating
alert,everytimeyoureceiveacallfromanotherMIDLAND G12,your
device will alert you of the call by vibrating but it will remain silent.
2 Silent call is a special feature which works only among MIDLAND
G12.
5.12 Enabling/disabling keypad tones
Keypad tones are emitted each time a button is pressed in order
to reduce the likelihood of accidentally pressing a button twice.
This option can be deactivated if you prefer the radio to be silent.
Toactivateordeactivatekeypadtones,carryoutthestepsoutlined
below:
1) Turnoffyourdevice.
2) Keep the
– button pressed and turn the device back on. All
symbols on the display light up for about one second and you
hearabeepsoundofconrmation.
3) Whenthedisplaycomesbacktoitsnormalstatus,releasethe
– button. The keypad tones will be disabled.
5.13 Enabling/disabling roger beep
“Roger beep” is a brief tone which your radio gives out at the end of
every transmission as soon as you release the
PTT button. This is
toavoidthatsaying‘roger’everytimeyounishtalking.Inorderto
enable/disabletherogerbeepdothefollowing:
1) Turnoffyourdevice.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland G12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland G12 in the language / languages: English as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info