543256

Midland G12 Manual

16
Zoom out
Zoom in
Previous page
1/32
Next page
16
English
2 Restricted trafc mode does not guarantee privacy of
communication. Indeed, when using CTCSS/DCS, anyone
operating in open trafc mode can hear your conversation, they
cannot however take part, as they would not be heard from you.
2 Restricted trafc mode allows the use of the same radio frequency
by more than one group. For example, group A using CTCSS No.
16 tone will not hear conversations of group B who uses CTCSS
No. 20 tone and vice versa. However, if more than one user
transmits at the same time (e.g. one user from group A together
with one user from group B) on the same channel, there will be
interference. For this reason do not transmit if the radio signals
that the channel is busy even if you do not hear anything, waiting
instead for it to be free. If in doubt use the monitor function.
2 If you have to use MIDLAND G12 in the proximity of electrical
equipment which generates electrical noise causing the squelch
to open frequently, it is advisable that you use the restricted trafc
mode.
5.8 Monitor function
Inordertolistenforextremelyweaksignals,asexplainedinpar.5.6.b,
thecircuitwhichsilencesaudioreception(squelch)isautomatically
turned off as soon as you receive a signal. However extremely poor
signalsmaynottriggerittoswitchoffand,asaconsequenceofthis,
you will hear broken conversation. In this case the function monitor
will help by disabling temporarily the squelch.
Moreover if the channel you are using has been programmed to
operateinrestrictedtrafc(ref.par.5.7),withthefunctionmonitor
you can temporarily disable CTCSS or DCS in order to monitor all
communication on the channel you are tuned in.
Inordertoactivatethefunctionmonitor,keeppressthe
SCAN/MON
button for about three seconds until you hear a faint background
noise(oreventuallytheweaksignal).
Inordertodisablethemonitorfunction,repeattheoperation.
2 Do not use the monitor function for too long as this will use up the
battery. The energy saving function (ref. par. 5.6.a) functions only
when the audio of your device is silenced (squelch enabled).
5.9 Selection of transmission power
The transmission phase absorbs the most energy. To extend the
batteryduty,youcanselectlowtransmissionpowerwhentransmitting
over short distances. When low transmission power is activated
willappearonthedisplay.Toselectlowtransmissionpower:
1) Presssixtimesthe
MENU button. The display shows Po (power of
transmission)followedby
Lo(low)orHi(high)ashingaccording
to the pre-set values.
2) Pressbuttons
+ o – until you have selected the desired power.
3) Press
PTTbuttontoexit,orwaitforfewseconds.Thedevicewill
go back to standby mode storing the new value set.
2 If you are transmitting to someone who is nearby, try always low
power of transmission. In this way you will extend battery life
and reduce the risk of being heard by others outside your line of
communication.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland G12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland G12 in the language / languages: English as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info