543256

Midland G12 Manual

14
Zoom out
Zoom in
Previous page
1/32
Next page
14
English
Channel Frequency (MHz) CTCSS/DCS
1 446.00625 NO
2 446.01875 NO
3 446.03125 NO
4 446.04375 NO
5 446.05625 NO
6 446.06875 NO
7 446.08125 NO
8 446.09375 NO
9 446.00625 CTCSS Nr. 16
10
446.01875 CTCSS Nr. 16
11 446.03125 CTCSS Nr. 16
12
446.04375 CTCSS Nr. 16
13
446.05625 CTCSS Nr. 16
14
446.06875 CTCSS Nr. 16
15
446.08125 CTCSS Nr. 16
16
446.09375 CTCSS Nr. 16
If you are communicating with a device of a different manufacturer
you are advised to use one of the rst eight channels so as to
guarantee maximum compatibility. Choose obviously the channel
that seems the less busy.
However,iftheotherpartyisalsoequippedwithMIDLAND G12 (or
anotherdeviceequippedwithCTCSStones),youcanchooseany
channel. Should all of the eight PMR446 frequencies be busy in your
areathenyoucanchooseachannel(theleastbusy)from9to16so
that the CTCSS only transmits communication from other members
of your group. For further details on CTCSS consult par. 5.7.
5.6 Reception and transmission
Duringtransmissionandreception,ensuretheantennaisasvertical
as possible and free from obstacles in the direction of your party to
get the best radio signal.
2 Reception and transmission mode described below is the
simplest and is the so-called “open trafc”. It is however possible
to operate, in a different way. Consult par. 5.7.
5.6.a Waiting for calls
When the
PTTisnotpressed,theradioisinreceptionmodeandit
is ready to receive incoming communication on the currently tuned
channel(stand-by).
When no signals are received,thecircuitcalledsquelchmutesthe
audio of your device in order to cancel the annoying background
noise.Inthesecircumstances,thestatusLEDwillashevery4/5
seconds.
If you are not receiving communications and have not activated any
commands forat least 10 seconds, the
iconwillashon the
display,indicatingthatthepowersaverfunctionhasbeenautomatically
activatedandthestatusLEDwillasheveryfourseconds.
5.6.b Reception
As soon as you receive a signal the squelch function which silences
the audio in the absence of signals will be automatically disabled
allowingyoutohearthemessagereceived.ThestatusLEDashes
morefrequently(onceabouteverysecond)andonthedisplaythe
icon shows the strength of the signal (the number of bars is
directlyproportionaltothestrengthofthesignal).
2 If reception is broken because of weak signal try to use the monitor
function as described in par. 5.8.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland G12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland G12 in the language / languages: English as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info