Manual Midland CT2000 (page 16 of 38) (English)

738655

Zoom out

Zoom in

1/38

12 | Midland CT2000 instruction guide

Receiving

When the radio receives a signal the display will show “RX” and the signal

strength. In case you won’t hear the incoming signal, you may need to set the

CTCSS or DCS tones in rx.

Transmitting

Before transmitting on the frequency or channel you have set, please check

they are not busy.

Press PTT and speak towards the microphone.

While you are transmitting, the led on the front panel will turn red and the

display will show output power signal strength. Release the PTT to receive.

Output power selection

You can set three dierent output power levels: high (25W), middle (10W),

low (5W).

Press Pw on the front panel of the radio. Everytime Pw is pressed, the output

power indicator in the display will change: “H” (high), “M” (middle) e“L” (low).

The output power can be selected also with the microphone: press FUN fol-

lowed by [8].

Note: you can set dierent output powers for the two bands A and B.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland CT2000 in the language / languages: English as an attachment in your email.

The manual is 3,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland CT2000 Manual

Product: