738655

Midland CT2000 Manual

15
Zoom out
Zoom in
Previous page
1/38
Next page
Midland CT2000 instruction guide | 11
Keep pressed the A/B button to switch from VHF to UHF band and viceversa.
Switching from frequency to channel mode
When the transceiver is in stand-by mode, push V/M on the radio or on the
mike to switch from frequency to channel mode. The mode will be changed on
the frequency in use (A or B).
In frequency mode “VFO” will appear on the display, while in channel mode you
will see the channel number.
It is possible to use the frequency mode in band A and channel mode in band
B or viceversa.
Frequency/channel adjustment
In frequency mode you can change the frequency number with the main knob:
clockwise to increase the value and counter-clockwise to reduce it.
Each “clic” you hear from the knob corresponds to an increase or decrease of
the frequency (it is the same as the set step).
If the desired frequency is far from the one in use, the quickest way is the
MHz tuning. To activate it press Mz on the front panel of tha radio. With a
short press you will change the frequency of 1 MHz step, while a long press (2
seconds) it will change of 10 MHz steps.
Or you can manually edit the desired frequency thanks to numeric keypad on
the microphone. If the frequency does not match with the current frequency
step, it will be automatically selected the nearest available frequency.
In channel mode it is possible to change the channel by turning the main knob.
Note: it is possible to adjust the frequency or the channel through the UP/
DOWN keys on the microphone. This can be done only if you enable UP/
DOWN to this feature: press [#].
Frequency step selection
The correct frequency step allows you to select the exact rx frequency through
the main knob or the UP/DOWN buttons.
The following frequency steps can be selected: 2,5 kHz - 5 KHz - 6,25 kHz
- 7,5 KHz - 8,33 kHz - 10 kHz - 12,5 kHz - 15 kHz - 20 kHz - 25 kHz - 30
kHz - 50 kHz.
To set the desired frequency step press FUN + [2]. Select the step by turning
the main knob or the UP/DOWN controls.
To confirm push PTT or wait for 5 seconds.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland CT2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland CT2000 in the language / languages: English as an attachment in your email.

The manual is 3,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info