738655
14
Zoom out
Zoom in
Previous page
1/38
Next page
10 | Midland CT2000 instruction guide
Main operations
Turning on and o
Push key for 1 second to switch on the radio. Push it again for 2 seconds
to turn it o.
Volume adjustment
Rotate the VOL knob clockwise to increase the volume and counter-clockwise
to reduce it.
Note: if you receive no signal, you can press the MON button on the micro-
phone to close the squelch and enable the audio. Then, rotate the VOL knob
to adjust the volume to a comfortable level.
Note: it is possible to adjust the volume also with the UP/DOWN controls on the
microphone.
If you press these buttons and the frequency will change, press # to enable the
UP/DOWN keys to adjust the volume level.
Squelch adjustment
Squelch is used to mute the speaker when no signals are present. With the
squelch level set correctly, you will hear sound only while actually receiving a
signal. The higher the squelch level selected, the stronger must be the signals
in order to hear them.
Squelch can be adjusted either on the mike keypad or on the front panel of
the radio.
To adjust the squelch from the keypad of the microphone, press the F button
and then [6]. Select the desired level with the UP/DOWN keys and push PTT
for confirmation.
While to do it from the radio, press the F button and then A/B. Select the
desired level by rotating the tuning knob.
Selecting a band
The LCD display shows two frequencies; the one at the bottom is the main
band (A), while the one in the upper part is the sub-band (B).
Press A/B (on the mike or on the radio) to select the desired band, A or B.
Everytime you press A/B, you will see
1
2
3
4 7 10
12
118956
2
3
4
5
6
1
13
14
15
close to the band you selected.
Selecting the VHF or UHF band
In frequency mode it is possible to choose the operating band.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland CT2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland CT2000 in the language / languages: English as an attachment in your email.

The manual is 3,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info