738621
25
Zoom out
Zoom in
Previous page
1/124
Next page
UK
www.midlandeurope.com 23
Manual activation
When in “Intercom Mode” press the Middle button on one of the two units
in “Intercom” mode. Communication is enabled and remains active until you
press again the middle button. The intercom need some seconds to activate,
you will hear a beep tone when the intercom is open.
Voice activation (VOX)
Simply say something, after some seconds the communication will be opened
and will remain active for the time you are talking. If there is no conversation
the intercom will be closed after 40 seconds.
If needed you can close the intercom manually without waiting 40 seconds
(just press the middle button).
If needed, you can enable/disable the VOX feature simply by pressing the
Backward button for 7 sec. A voice announcement will advise you when the
VOX is enabled/disabled. To turn the VOX on again, just press the same but-
ton and a voice announcement will advise you that the VOX is now active.
This setting is remembered also if you turn o the unit.
Attention: The Voice activation (VOX) can open the intercom communication
only to the unit that was paired with the Middle button. If you choose to use a
dierent button (Forward or Backward ), you will be able to active the intercom
only manually.
Adjusting the volume
Your Midland BTX2 PRO S uses AGC technology, which automatically adjusts
the listening volume in relation to background noises.
However, it is also possible to manually adjust the volume by means of the
“Volume +” and “Volume -”buttons.
The volume setting is indipendent for each audio source: intercom, stereo mu-
sic, phone call, FM radio.
Attention: volume can be adjusted only when an audio connection is active.
Set up of the AGC system
To adjust the sensitivity of the AGC system you can use the ”BT UPDATER”
Pc Software or the smartphone “BT SET-APP” application. You can choose
dierent set up based on your motorbike type (naked, touring, sport) or if you
are riding as a passenger. You can disable the AGC system pressing “Volume +”
and “Volume -” together for 3 sec.
How to pair the Midland BTX2 PRO S to more than two units
One Midland BTX2 PRO S unit can be paired to maximum five other BT units,
that means six in total (3 Midland unit + 2 Talk2All + yourself).
The Midland BTX2 PRO S has three main buttons (Forward, Middle and Rear).
It is up to you which button to use to pair and activate the intercom, you are
totally free to choose the button you like more. The same button you will use
to pair the unit will be also used to activate the intercom communication.
Remember that each device can always be paired with other 3 units at your
choice; as shown in the picture here below, also ‘crossed’ pairing can be done.
For example you can decide to pair one motorbike rider unit to the Forward
button, your passenger to the Middle button and another rider to the Rear
button.
In this way you can have in total 4 units paired together and talk to each person,
one by one, simply by pressing the corresponding button (the same used for
the pairing). Every time you open the intercom connection to one person, the
Rider 2
Passenger 1
Rider 1
Rider 3
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland BTX2 PRO S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland BTX2 PRO S in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 9,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland BTX2 PRO S

Midland BTX2 PRO S Installation Guide - English, German, French, Italian, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info