738621
27
Zoom out
Zoom in
Previous page
1/124
Next page
UK
www.midlandeurope.com 25
request is coming.
In this way as soon as the first conversation is over, the person can easily con-
tact the caller by opening the intercom of the specific button number (indica-
ted by the voice announcement).
Conference
The “Conference” mode allows the simultaneous communication between 4
people or, if you pair a intercom device also on “Vol-” , up to 8 people (4
couple). You can decide to use the BTX2 PRO S in “one to one” communi-
cation up to 6 people (“classic” Intercom mode) or with 8 people (4 couples)
conference intercom (Conference mode).
How to use the conference mode
First of all you need to pair all the units in a “chain” mode, second the “Confe-
rence” feature must be active on all the units paired.
Pairing
To use the conference mode you need to pair all the units in a “chain” configu-
ration. The BWD button of the first unit must be paired to the FWD button
of the second unit. The BWD button of the second unit must be paired to the
FWD button of the third unit and so on, till the fourth!
The first and the last unit must not be paired together (the chain must stay
open). The unit number 1 can talk to the last unit (number 4) only “through”
the unit number 2 and number 3. That means to have the conference with four
people, all the unit must have the intercom open.
Activate Conference mode
In any mode with no active audio, keep pressed the FWD and Central buttons
for 3 sec. The voice announcement “Conference” will tell you that it is active.
When the Conference mode is active the bluetooth devices paired on “Vol+”
button are disconnected, the paring on CTRL button and the Universal Inter-
com are not available. Now only the paring on FWD and BWD buttons are
available, together with the device paired on the “Vol -” button.
When in Conference mode, you can always move to “FM radio” mode to li-
sten your favorite radio station or to “Phone” mode to control the phone con-
nected on the “Vol-” button.
Disable Conference mode
In any mode with no active audio, keep pressed the FWD and Central buttons
for 3 sec. The voice announcement “Intercom” will tell you that you are back
to the “One to One” Intercom mode and the device connected to the “Vol
+” is available again, together with the Phone, the pairing on CTRL button and
the Universal Intercom.
Conference mode 4 people
When the conference mode is active, it is possible to open the conference
communication pressing both the FWD and BWD buttons. One click on the
button will open the intercom communication, one click on the same button
will close it. The two units that are in the middle of the chain (unit 2 and 3)
must keep the intercom open on both FWD and BWD buttons to allow the
full communication of the four units together.
“One Click Talk” function
When the conference mode is active, is possible to open the conference com-
munication to all the 4 users just in “one click”. Press short the CTRL (mid-
dle) button and you will automatically open the conference to the four units
connected.
1
2
3
1 2 3 4
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland BTX2 PRO S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland BTX2 PRO S in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 9,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland BTX2 PRO S

Midland BTX2 PRO S Installation Guide - English, German, French, Italian, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info