738621
24
Zoom out
Zoom in
Previous page
1/124
Next page
UK
22 www.midlandeurope.com
You can switch (toggle) from one mode to the other simply pressing the
Middle button for 3 seconds. A voice announcement will tell in which mode
you are on.
The toggle sequence is the following:
Intercom mode (if another unit has been paired)
FM Radio
Phone mode (if a phone has been paired)
Every time you turn on the unit, the default mode is the last used mode.
The Intercom mode and Phone mode are avalaible only if it was previously pai-
red to another unit or to a phone.
If you need to know in which mode the unit currently is, just press the “Volume
+ “ and “Volume –” button together. A voice announcement will tell you the
current mode.
Maximum Distance
You can reach 1.2 Km intercom distance if you are in line of sight without ob-
structions and interferences (the riders must be always in sight).
How to pair two Midland BTX2 PRO S units
The two units supplied in the same Midland BTX2 PRO S box, are already
paired and ready to use, this means you don’t need to perform this procedure.
The units are already paired using the Middle button.
If the devices are not part of the same kit, or the units has been purchased
separately, you need to first pair them in order to use them.
To pair the Midland BTX2 PRO S to another Midland BTX2 PRO S unit
To pair the Midland BTX2 PRO S to another Midland BTX2 PRO S unit, you
must first enter the setup mode:
1. Turn o the unit.
2. Press and hold down the middle button about 7 sec., until the Red light is
on permanently.
3. Now press the Middle button for 3 seconds. The Blue and Red lights will
flash.
4. Do the same procedure on the other unit. When successfully paired, each
unit will have the Blue light on for one second and then go back to the setup
mode (Red light always on).
5. Now the pairing procedure is complete, you just need to exit the setup
mode before you can use the units.
6. Double click on the Middle button, the Red light will turn o and the Blue
light will start flashing.
You can use now your Midland BTX2 PRO S
Attention: remember to switch o all the other Bluetooth devices that are not
part of the pairing procedure, only the two devices involved in the pairing must
be turned on.
How to use the Intercom with two units
To use the intercom feature, be sure that both units are turned on and cor-
rectly paired together.
Here is an example of the buttons main functionality based on the mode you are on.
Mode Forward (Left button) Middle button Rear (Right button)
Intercom Open/close the intercom to the first rider Open/close the intercom to the second
rider
Open/close the intercom to the Third rider
Phone Redial last number/accept or reject
incoming call on “Vol+”
Redial last number/accept or reject
incoming call on “Vol-”
Phone (while music play) Forward the song Play/pause Backward the song
FM Radio Scan up FM Radio On/o Scan down
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland BTX2 PRO S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland BTX2 PRO S in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 9,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland BTX2 PRO S

Midland BTX2 PRO S Installation Guide - English, German, French, Italian, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info