8
2. Set the BT2 unit in “Setup” mode, then press the “Phone” but-
ton on the unit until the red and blue indicators start ashing.
3. After a few seconds the mobile phone will display “Midland
BT2”. Select it and follow the instructions provided in your
mobile phone manual to accept the pairing. When prompted,
enter the pairing code, which is 0000 (four zeroes). Your mo-
bile phone should then display a conrmation message if the
pairing operation has been successfully completed.
4. The BT2 unit returns to the Setup mode (red indicator perma-
nently on) to indicate that it is ready to be paired with other
devices
If you pair the BT2 unit with a mobile phone, you will not be able
to pair it with a GPS Sat-Nav, because both these devices are
assigned (high) priority 1.
This problem can be easily solved by pairing your mobile phone
directly with your GPS Sat-Nav and then pairing the GPS with
your Midland BT2 using the above procedure. In this case, the
mobile phone features will be managed by the GPS Sat-Nav.
Pairing the unit with a GPS Sat-Nav
It is generally possible to pair the BT2 unit with all GPS Sat-
Navs that support Bluetooth earpieces.
Midland BT2 has been successfully tested for use with GPS
ZUMO Sat-Navs manufactured by Garmin and TOMTOM
Rider 1 and 2 Sat-Navs.
1.
On your GPS Sat-Nav, enable the Bluetooth earphone search
feature. As this procedure varies according to the brand and
model of GPS, we recommend you refer to the manual sup-
plied with your GPS Sat-Nav for further information.
2. Ensure that the BT2 is in Setup mode (Red light on) &
Press the “Phone” button on the BT2 unit until the red and
blue indicators start to ash.
3. After a few seconds the GPS Sat-Nav will display “Midland
BT2”. Select it and follow the instructions provided in the
GPS Sat-Nav manual to accept the pairing. When prompt-
ed, enter the pairing code, which is 0000 (four zeroes).
The GPS should then display a conrmation message if
the pairing operation has been successfully completed.
4. The BT2 unit returns to the Setup mode (red indicator per-
manently on) to indicate that it is ready to be paired with
other devices.
If you pair the BT2 unit with a GPS Sat-Nav, you will not be
able to pair it with a mobile phone, because both these de-
vices are assigned (high) priority 1.
This problem can be easily solved by pairing the mobile
phone directly with the GPS Sat-Nav and by then pairing your
GPS with the Midland BT2. In this case, the mobile phone
features will be managed by the GPS Sat-Nav.
Pairing the unit with a Bluetooth Enabled
MP3 player
NB: Not all MP3 players are “Bluetooth Enabled” Please
check your MP3 players specication before attempting
to connect to the BT2 via Bluetooth.
1. On you MP3 player enable the Bluetooth device search
feature. As the procedure varies according to the brand
and model, refer to the manual supplied with your MP3
player for further information.
2. Ensure that the BT2 is still in Setup mode (Red light on) &
Press the “AUX” button on the BT2 unit until the red and
blue indicators start to ash.
3. After a few seconds the MP3 player should display “Mid-
land BT2”. Select it and follow the instructions provided in
the MP3 Player manual to accept the pairing. If requested,
enter the pairing code, which is 0000 (four zeroes). The
MP3 player should then display a conrmation message if
the pairing operation has been successfully completed.
4. The BT2 unit returns to the Setup mode (red indicator per-
manently on) to indicate that it is ready to be paired with
other devices.
Pairing the unit with other Bluetooth devices
The Midland BT2 can also be paired with other Bluetooth de-
vices such as non-Bluetooth enabled products connected to
Bluetooth adapters (for example any personal audio product unit
connected to a BPA100) or Two Way Radio transceivers with
built-in Bluetooth connections (for example the Midland 445BT).
1. Enable the pairing mode on the Bluetooth device. As the
procedure varies according to the brand and mode, refer
to the manual supplied with the Bluetooth device for further
information.
2. Ensure that the BT2 is in Setup mode (Red light on) &
press “AUX” button on the BT2 unit until the red and blue
indicators start to ash.
3.
The pairing will be completed in a few seconds and the BT2
unit then returns to the Setup mode (red indicator permanently
on) to indicate that it is ready to be paired with other devices.
