Manual Midland bt2 intercom (page 25 of 146) (German, French, Italian, Spanish)

232783

Zoom out

Zoom in

1/146

communications except those with (High) priority 1. This is

true if you haven’t changed the default setting, following the

procedure described in the nal chapter “Special Congura-

tion”. The two Midland BT2 units can be paired by means of

“Volume +” and “Volume –“ buttons.

Devices with (Low) priority 3

MP3 players, Bluetooth adapters or PMR446 transceivers

have the lower priority, which means that all communications

with these devices will be disabled if a call or GPS communi-

cation (priority 1) arrives or if the Intercom feature is enabled

(priority 2).

Devices with priority 3 must be paired with the BT2 unit using

the “AUX” button.

Midland BT2 can also be paired with audio devices by means

of a wired connection. This connection has the lowest prior-

ity and is disabled every time a Bluetooth connection is ena-

bled.

Switching your MIDLAND BT2 on and off

BT2 can be switched on by means of the central button la-

beled “Intercom”.

To switch off the unit you must use a combination of two

buttons (intercom+AUX), thus lessening the chances that you

might turn off the unit accidentally (especially whilst wearing

heavy gloves).

Switching the unit on:

Press and hold Intercom button down for approximately 3 ›

seconds until the BLUE indicator lights.

Switching the unit off:

Press and hold both “Intercom” and “AUX” buttons to- ›

gether for approximately 3 seconds until the RED indicator

ashes 3 times.

Pairing with Bluetooth devices

Your Midland BT2 is a Bluetooth unit that can be paired with

other Bluetooth devices.

Before performing this procedure, it is necessary to set BT2

into “Pairing mode” (Setup).

The only operations permitted in this mode are the pairing

ones. To use the BT2 unit after pairing it with the desired de-

vices, it is necessary to quit the “Setup” mode and switch to

the “Operating” mode.

Setup mode

Switch off the BT2 device. Press and hold down the central

button (Intercom/on) for about 7 sec. until the red indicator

switches on permanently. BT2 is now in “Setup” mode and

can therefore be paired with other devices.

Pairing the unit with another BT2 unit

The two units supplied in the Midland BT2 Intercom TWIN

kit, are already paired and ready for use, which means

that it is not necessary to perform this procedure.

If the devices are not part of the same kit, or one of the BT2

units has been purchased separately, you need to pair them

in order to be able to use the Intercom function.

Place both BT2 units in Setup mode (red indicator perma-

nently on)

Press the “Volume +” button on the rst unit until the RED and

BLUE lights begin to ash rapidly and alternately.

Then press the “Volume –“button on the second unit until the

RED and BLUE lights begin to ash rapidly and alternately.

Now both BT2 units are trying to pair to each other.

When successfully paired, each device will light the BLUE

light for 1 sec and go back to setting mode (red light always

on) waiting for additional pairing or setting procedures.

Pairing the unit with your mobile phone

Enable the Bluetooth device search feature on your mobile

phone. As this procedure varies according to the brand and

model of the mobile phone, refer to the manual supplied to

your particular phone for further information.

OFFON

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland bt2 intercom in the language / languages: German, French, Italian, Spanish as an attachment in your email.

The manual is 1,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland bt2 intercom

Midland bt2 intercom User Manual - English - 23 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland bt2 intercom Manual

Product: