232783
23
Zoom out
Zoom in
Previous page
1/146
Next page
5
UK
Description of the audio kit
The audio system includes two ultra-at stereo speakers and
two interchangeable microphones, which are both supplied
with a bracket and wire connection.
Fixing the stereo speakers. The two stereo speakers have
a Velcro/adhesive strip that aids their xing to your helmet.
Beware to not completely cover your ear with the speak-
ers, you must always be able to listen to the trafc sound
and indication.
The microphone can be xed onto the helmet in two ways:
Boom Microphone. Place the section with the Velcro/ad-
hesive strip between the padding and the rigid cover of the
helmet, so that the microphone is correctly positioned in front
of your mouth and that the white symbol is facing your mouth.
This type of microphone is suited for Open Faced and Flip
Front helmets.
Wire microphone. Using the Velcro/adhesive strip, place the
microphone inside the helmet in front of your mouth. This type
of microphone is more suited for Full Faced helmets.
The mini connector on the microphone allows you choose the
microphone that best suits the helmet you are using.
The audio kit must then be connected to the central jack of
the Midland BT2 Intercom unit using the “L” shaped connec-
tor. This connector is very exible and can be easily adapted
to most commercial helmets.
Description of the installation brackets
The Midland BT2 can be xed onto the helmet in two different
ways: By either using the plate with bi-adhesive strip, or the clamp.
These methods allow you to safely “x” the BT2 unit onto your hel-
met and to remove it at any time in order to recharge or store it.
Plate with bi-adhesive strip
The xing plate has a bi-adhesive strip on one of its sides. To
x the plate in place, clean the application area on the hel-
met surface, remove the bi-adhesive lm and place the xing
plate on the helmet by keeping it contact with the surface for
a few seconds.
Clamp
Using the Allen Key, loosen
the two screws on the clamp
and place the rear plate be-
tween the helmet padding
and the external rigid protec-
tion. Then, tighten the two
screws in order to rmly x
the clamp in place.
Fitting and removing your Midland BT2
The BT2 can be easily tted onto the helmet by sliding it
downwards so that it ts into the slot of the selected xing
device (plate with bi-adhesive strip or clamp).
BT2 is maintained in position thanks to the xing clip located
on the upper section (A).
To detach the BT2, simply press the xing clip and push the
unit upwards.
A
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Midland bt2 intercom at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Midland bt2 intercom in the language / languages: German, French, Italian, Spanish as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Midland bt2 intercom

Midland bt2 intercom User Manual - English - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info