Manual Midland BT Ski (page 10 of 16) (English)

543243

Zoom out

Zoom in

1/16

your dealer as to which cable is best suited to

your needs.

To communicate via the attached radio, press

the transmission Press To Talk (PTT) button to

speak and release it to listen. It is not possible to

talk and listen simultaneously. Communications

can be activated also without pushing the PTT

button, by enabling the VOX function.

Special congurations

Some Midland BTSKI features can be

congured to suit specic needs

Voice enable Intercom (VOX) ›

Adjust the microphone sensitivity ›

Disable the VOX feature ›

Wired connection always on ›

Enabling the intercom by voice (VOX)

The Intercom feature can be enabled both

manually and vocally (VOX). The VOX

activation is inuenced by the background

noise and therefore by the speed.

For optimum results, it is possible to choose

one of the following four microphone sensitivity

levels: high, medium, low and very low. The

default setting of BTSKI is “medium”. It is also

possible to disable the VOX feature in order to

activate the Intercom and phone call answering

features in manual mode only.

Adjusting the sensitivity of the

microphone (VOX)

1. Enter the Setup mode: Switch your BTSKI off.

Press and hold down the central button (Con-

trol) until the red indicator switches on perma-

nently. Your BTSKI is now in “Set up mode”.

2. Press the “Volume+” and “Control” buttons till

the red indicator will turn to steady blue.

3. Now, press “Volume +” or “Volume -“to increa-

se or reduce sensitivity. Every time you press

the Volume buttons the RED light will ash for

conrmation. When you reach the end of the

upper and lower limit, the RED light will not

ash.

4. Double press the “Control” button; the Blue

light will ash several times, in order to let you

know the selected sensitivity:

once = VOX disabled

Twice = very low sensitivity

3 times= low sensitivity

4 times= medium sensitivity

5 times = high sensitivity

Default = medium sensitivity

5. The light indicator is now back to steady RED

(“Set up mode”) and the changes are conr-

med

6. If needed, you can adjust again the sensitivity

repeating the steps from point 2, otherwise

exit the Setting mode by double clicking the

“Control” button. Once the red light turns off,

the blue led starts blinking. Now you can use

your BTSKI.

Disabling the VOX feature (Intercom

and telephone)

Follow all the procedure described in the

previous steps and choose the option 1 (VOX

disabled). You will see the blue led blinks once.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland BT Ski in the language / languages: English as an attachment in your email.

The manual is 2,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland BT Ski Manual

Product: