Exit SETUP mode While in Setup mode, double click the Control button. The
Red light will turn off and the Blue light starts ashing.
Pairing a Phone While in Setup mode, press the Control button until the
LED light ash Red and Blue alternately
Pairing your BTSKI with another BTSKI
device
While in Setup mode, press the Volume + on one unit (the
light will ash Red and Blue alternately), press the Volu-
me- on the other unit (the light will ash Red and Blue
alternately). On a successful pairing, both light turn to Blue
for one second.
Reset all paired devices While in Setup mode, long press he Volume + and he Vo-
lume -. On a successful reset, the Blue light will turn on
for two second.
SPECIAL SETUP CONFIGURATION
Change VOX sensitivity or disable it While in Setup mode, press short the Control and VOL+
buttons (blue light on). Now, press “Volume +” or “Volume-“
to increase or reduce sensitivity. Double click the Control
button to visualize the VOX status. Go back to the SETUP
mode (Red light always on).
VOX STATUS (Blue light ashing):
Once = VOX disable
Twice = very low sensitivity
3 times = low sensitivity
4 times = medium sensitivity.
5 times = high sensitivity
Wired connection always on Enabling: In “Setup” mode, press the “Volume+” and “Vo-
lume -” buttons for one second. The blue LED will ash
once.
Disabling: Follow the same procedure up described; now
the blue LED will ash twice