Manual Midland ALAN HM06 (page 9 of 20) (English)

738665

Zoom out

Zoom in

1/20

English

4 INSTALLATION INSTRUCTIONS

I ATTENTION! The unit must be installed by qualied techni-

cal personnel and with appropriate instrumentation only. The

instructions provided below are provided to assist installers,

who shall however be fully responsible for damages originat

ing from an improper installation, which may seriously dam

age the transceiver or cause injuries or damage to other peo

ple/property. Always follow the instructions provided in this

section and in Chapter 2.

I The unit must be installed in accordance with the instruc-

tions of the manufacturer of the vehicle. For assistance (for

example on the holes that have to be drilled, power connec

tions and cable threading), contact the Technical Support

of the vehicle manufacturer.

I The unit guarantees excellent performance, like any other elec-

tric equipment, only if it is regularly tested by an authorized

laboratory. For additional information, contact your radio link

provider or the Technical Department of CTE International.

4.1Locationandxingoftheradiocomponents

4.1.a Transceiver

Choose a location that is easily accessible to operators and that

meetsthesafetyrequirements speciedinChapter2. Usetherod

andscrewssuppliedwiththeradiotoxitinplace.

4.1.b Palm-sized microphone support

The support supplied with the radio (mod. R14053) is intended to

hold the microphone when the radio is not in use.

ItisalsopossibletoconguretheradiosothattheMonitoringfeature

(hang-up) is automatically enabled when the microphone is removed

from the support.For additional information on the Monitoring feature,

see paragraph 6.6.

Installing the support:

1) Placethesupportnexttothefrontsideoftheradio,inalocation

that is easily accessible to the operator.

2) To enable the Monitoring feature when the microphone is re

moved from the support (hang-up), connect the latter to a nega

tive pole (earth of the vehicle).

I Fix the support so that the microphone cable is not stretched

and the oscillation of the microphone does not cause im

pacts with the vehicle components or other parts, which

could cause damage. The presence of adjacent objects

may result in the microphone transmission key (PPT) being

pressed and in the consequent enabling of transmission.

4.2 Installing the vehicle aerial

Install the aerial outside the vehicle in a vertical and free location in the

center of the roof. Always verify that the installation procedure must be

performed in compliance with general and local safety standards, and

in accordance with the instructions provided in Chapter 2.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Midland ALAN HM06 in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Midland ALAN HM06 Manual

Product: