517341
100
Zoom out
Zoom in
Previous page
1/182
Next page
100
ķ
Manual flash exposure correction in slave operation
A manual flash exposure correction of can be set from –3 to +3 stops (EV) in
1/3 increments on the slave flash unit in the remote mode (see also 8).
Setting procedure
• Press key combination “Select” repeatedly
until “EV” flashes in the display.
• Using the keys + and — set the desired
correction value.
The setting is immediately effective and is
automatically saved after approx.
5 seconds.
As a reminder of the flash exposure correction value set, „EV“ continues to flash
in the display.
To deactivate the flash exposure correction, delete the setting of the correction
value using the keys + and —.
9.2.2 SERVO mode
Servo mode is a simple slave mode with complete preflash suppression, in
which the slave flash unit always triggers a flash as soon as the camera flash
unit receives a light pulse.
Adjustment procedure for SERVO flash mode
• Set the camera to P-TTL mode.
• Press the "Select" button repeatedly until
blinks on the display.
• Press the + button to activate remote slave mode.
• Press the + button again and activate servo mode. In
servo mode, only manual flash mode is pos-
sible. Manual flash mode is automati-
cally activated after switching to servo
mode.
• Partial lighting levels can be set with the + and - buttons.
• Wait for the flash-readiness of all connected flash units. Once the slave flash
unit is ready, its AF measuring beam will start blinking.
Slave groups and remote channels can not be set in SERVO mode.
The flash unit may not be activated in remote mode.
Turn off SERVO flash mode
• Press the button sequence repeatedly until
SERVO blinks on the display.
• Press the – button twice to turn the SERVO
mode off.
M
SL
EV
CH
2
Zoom
35
mm
SL
EV
On
SL
SL
SERVO P 1/1
Zoom 24 mm
M
SERVO
OFF
SL
OFF
709 47 0191.A3 50AF-1 Pen. 17.12.2010 13:22 Uhr Seite 100
100


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metz MECABLITZ 50 AF-1 digital Pentax at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metz MECABLITZ 50 AF-1 digital Pentax in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info