517341

Metz MECABLITZ 50 AF-1 digital Pentax Manual

98
Zoom out
Zoom in
Previous page
1/182
Next page
98
ķ
manual zoom setting results in the shot not being completely lit by the
main reflector (for example, spot effect), the display of the zoom position
of the main reflector flashes as a warning!
Tip:
If you do not necessarily need the full guide number and maximum flash range
of the flash unit, you can leave the zoom reflector at the position for the shortest
focal length of the zoom lens. This will provide full light coverage of the picture
and eliminate the need to continually adjust it to the focal length of the lens.
Example:
You use a zoom lens with a focal length range of 35 mm to 105 mm. In this
case, you set the position of the main reflector of the flash unit to 35 mm.
Resetting to auto-zoom
• Touch the shutter release to begin a data transfer
between the flash unit and the camera.
• Press the button combination „Select“ until
„M.Zoom“ appears flashing next to the zoom posi-
tion (mm).
• Press the button + until the 105 mm position has
been exceeded. The flashing display „M.Zoom“
changes to „Zoom“ (= auto-zoom mode)
and the zoom position of the main reflector
ቫ is automatically adjusted to the lens focal
length.
The setting takes effect immediately.
After about 5 seconds the display stops flas-
hing and the setting is saved automatically.
The return from manual zoom mode to auto-zoom mode also occurs if
the flash unit is switched on again with the main switch ቢ.
☞
Wide-angle diffuser
With the wide angle diffuser ቩ, focal lengths of
12 mm or more can be illuminated (35 mm format).
Pull the wide-angle diffuser ቩ out from the main
reflector as far as it will go, and then release it. The
wide-angle diffuser ቩ automatically folds down-
wards.
The main reflector ቫ automatically moves to the required position. The distance
readings and the zoom value are corrected to 12 mm on the display panel.
The automatic adjustment of the motor-zoom main reflector ቫ is not
activated if the wide-angle diffuser is in use.
To insert the wide-angle diffuser ቩ, turn it upwards 90° and push it all the way in.
Mecabounce 58-90
If the Mecabounce 58-90 (optional accessories, see 17) is fitted to the main
reflector ቫ of the flash unit, the main reflector is automatically guided to the
position required. The distance data and zoom factor are corrected to 16 mm.
The automatic adjustment of the motor-zoom main reflector ቫ is not
activated if the Mecabounce is in use.
The simultaneous use of the wide-angle diffuser and the Mecabounce is
not possible.
☞
☞
☞
8,7
m
Zoom
50
mm
Zoom
☛
☛
☛
709 47 0191.A3 50AF-1 Pen. 17.12.2010 13:22 Uhr Seite 98
… 98 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metz MECABLITZ 50 AF-1 digital Pentax at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metz MECABLITZ 50 AF-1 digital Pentax in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info