517338
88
Zoom out
Zoom in
Previous page
1/174
Next page
88
ķ
7 Flash modes („Mode“)
Depending on the type of camera different
TTL flash modes, manual flash mode and
high-speed synchronisation HSS are availa-
ble. Therefore, data transfer between flash
unit and camera is necessary before setting
the flash mode, e.g. by actuating the shutter
release. The flash mode is set by using the
„Mode“ button.
7.1 TTL-flash modes
The TTL flash modes offer a very simple method of achieving very good flash
shots. In these modes, exposure readings are taken by a sensor built into the
camera, which measures the amount of light through the camera lens
(TTL = „Through The Lens“). Here the camera automatically determines the flash
performance required for a correct exposure of the shot. The advantage of the
TTL flash modes is that all factors influencing exposure (filters, change of aper-
ture and focal length with zoom objectives, extensions for close-ups, etc.) are
automatically taken into account in adjusting the flash light.
If the shot was correctly lit, the correct exposure indi-
cation will flash „OK“ for about 5 seconds (see
4.2).
Please note whether there are limitations for your camera in terms of
film sensitivity for TTL flash mode (for example, ISO 64 to ISO 1000; see
camera’s operating instructions)! In analogue cameras there must be a
film in the camera to test the TTL function!
E-TTL- and E-TTL-II - flash mode
E-TTL and E-TTL-II flash modes are digital flash modes based on the further
development of the TTL flash mode for analogue cameras. During shooting, the
flash unit emits an almost imperceptible metering preflash prior to the actual
exposure. The light reflected by the metering preflash is evaluated by the
camera. The camera adjusts the subsequent flash exposure to the photographic
situation according to the evaluation (see the camera operating manual for
more details).
Setting procedure
• Press „Mode“ until „E “ flashes in the
display. The flash unit automatically sets either ETTL
or E-TTL II flash mode depending
on the camera type.
A distinction between E-TTL and E-TTL II is not made in the flash unitís display or
in this manual.
The setting takes effect immediately.
After about 5 seconds the display stops flashing and the setting is saved auto-
matically. „E “ appears in the display.
TTL
TTL
F 5,6
7,5
m
Zoom
105
mm
TTLE
TTLE
F 5,6
7,5
m
Zoom
105
mm
TTLE
TTLE
709 47 0175.A2 50 AF-1 C 26.08.2010 15:52 Uhr Seite 88
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metz MECABLITZ 50 AF-1 digital Canon at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metz MECABLITZ 50 AF-1 digital Canon in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info