517338

Metz MECABLITZ 50 AF-1 digital Canon Manual

87
Zoom out
Zoom in
Previous page
1/174
Next page
87
ķ
- when the reflector head is tilted out of its normal position (upwards,
downwards or sideways).
- the flash unit is working in remote flash operation (slave SL).
Range display in TTL flash modes
In the TTL flash modes ( , E , E HSS;
see 7.1) the value for the maximum range of
the flash unit is displayed. The value indica-
ted relates to subjects with a reflection factor
of 25%, which applies to most photographic
situations. Strong deviations from this reflec-
tion factor, as in the case of highly reflective
or poorly reflective subjects, may affect the flash range of the flash unit.
The subject ought to be in the area of approximately 40% to 70% of the value
displayed. This will give the automatic exposure control sufficient scope for com-
pensation. To avoid overexposure, the minimum distance should be no less than
10% of the indicated value! Adjustment to the photographic situation at hand
can be achieved by, for example, changing the aperture of the setting on the
lens.
Range display in manual flash mode M
In manual flash mode , the distance that
must be maintained from the subject for
correct flash exposure is indicated.
Adjustment to the photographic situation at
hand can be achieved by, for example,
changing the aperture setting on the lens or
selecting a manual partial light output level
(see 7.2).
M
TTLTTLTTL
Exceeding the display range
The flash unit can indicate flash ranges of up
to 199 m or 199 ft. This display range can be
exceeded in the case of high ISO values
(e.g., ISO 6400) and large aperture openings.
An arrow or triangle after the distance value indicates
that the display range has been exceeded.
6 Displays in the camera viewfinder
Examples for the camera viewfinder display:
Flash symbol
flashes:
Prompt indicating that the flash unit is to be switched on or used (by some
cameras).
Flash symbol is illuminated:
The flash unit is ready for use (by some cameras)
The viewfinder in some cameras features an incorrect exposure warning func-
tion: the viewfinderís display for aperture value, shutter speed (or both) flashes
by over or underexposure.
Incorrect exposure guidelines:
• overexposure: do not use the flash!
• underexposure: switch the flash on or use a tripod and a longer
exposure time.
Reasons for incorrect exposure can lay in the various exposure and automatic
programmes.
For information applicable to the displays in the viewfinder of your
camera model, refer to the camera’s operating instructions.
☞
F 5,6
7,5
m
Zoom
105
mm
TTLE
7,5
m
✴
F 5,6
7,5
m
Zoom
105
mm
M
✴
F 5,6
199
m
Ī
Zoom
105
mm
M
199
m
Ī
✴
7,5
m
709 47 0175.A2 50 AF-1 C 26.08.2010 15:52 Uhr Seite 87
… 87 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metz MECABLITZ 50 AF-1 digital Canon at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metz MECABLITZ 50 AF-1 digital Canon in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info